Name: japan brake PAD ,high quality Brake pads ,A metal/ceramic
Brand: Haichen
Availability: InStock

Product Details

Triple protection

1.Mechanial Retention

An integral steel mesh,stud welded to the backing plate through and around which the friction material flows.

When the friction material is cured the mechanical shear strength is greatly enhanced.

2.Adhesive Retention

The backing plate (and the steel mesh) is coated with thermosetting phenolic adhesive.

This delivers the standard industry strong resistant to thermal stress.

3.Formulated Retention

The best compound for brake performance may not be the best for bonding.

In order to ensure a perfect bond we insert an “interlayer” of material.

Pecifically formulated for bonding between the backing plate and he main friction block.during molding and curing this interlayer flows andfuses organically into the main friction block,adhering perfectly to the backing plate and steel mesh.

The resulting final bond is fully secure.

Our Services

Advantages:

1)Able to processing with supplied samples and trademark

2)Available to use customers packing box with customer brand

3)Competitive price and reliable quality among peer marketplace

4)Extremely precise Technology and strictly test before shipment ensure you 100% safety

5)Warranty:If there is any quality problem, we will supply the same quantity goods with free charge to you

6)Quality Policy:Quality is first in our factory;insist on sincere service.Have continued to improve;to enhance customer satisfaction.

prompt

1.the biggest factor affecting the life of the brake pad is the driver's high speed and frequent brake, which will make the brake pads and brake disc comprehensive service life of 15%-30%, so in order to your driving safety must maintain good driving habits;

2.disc brake slice thickness of friction materials should not be <3.5mm, brake vehicles with sensor wiring warning lamp. When the thickness of friction material <3.5mm, brake pad warning lantern lit, prompt replacement brake; brake slice thickness of friction materials should not <3mm, once reached thickness more than is necessary to change the new brake pads.

3.the replacement of the brake pad should be left and right wheel at the same time to replace

4. When the brake disc is contaminated by oil, please remove the surface of the oil and check the oil circuit system, to avoid the surface of the brake pads are contaminated, the need to change the brake pads.

Method of replacing

	1.Check whether the change of the brake disc is damaged, and ensure the appearance of the product is in good condition
	Remove old brake pads, check the wear of the brake disc. Severe wear (unilateral depth >1.2mm) should be replaced with a new brake disc
	After the complete brake system is installed, the tire should be reset
	Check that the brake fluid level is lower than the minimum standard and added

Ceramic brake pads

the biggest difference between the ceramic brake pads and the half metal brake pads is that there is no metal, which avoids the friction between the traditional metal brake pads and the brake discs.

2, ceramic brake graphite sheet and the brake the biggest difference is used does not produce black powder is attached on the surface of the wheel hub, the steel ring oxidation so as to reduce the life affect the appearance.

3, the stability of the friction coefficient, even when the brake disc temperature up to 650 degrees, the friction coefficient of the ceramic brake pad is still maintained at around 0.45, to ensure that the vehicle has excellent braking performance, the average braking performance of more than 20%, shorten the braking distance, improve the safety of the driver.

4, ceramic has excellent thermal stability and low thermal conductivity, good wear resistance to extend the service life of the brake pads.Ordinary brake pads use life of about 30000 kilometers, while the use of ceramic brake pads for more than 50000 kilometers, but also to extend the service life of more than 20%.

problems & Solutions

NO.	The phenomenon of	Reason	Solution
1	brake braking noise of "Zhi Zhi", "hissing"	1. is due to severe wear of the brake disc edge projections and the brake friction plate issued 2. disc and sheet sand and other hard material 3. the poor quality of the brake pad	1. the replacement of the same type of brake disc 2.Grinding the edge of a plate with a device. 3. use sandpaper (cloth) blunt pad corner 4. clear impurities 5. the replacement of brake pads
2	even in the normal running of the brake disc brake does not hear a "ticking" sound	The fastening pin of the brake disc brake caliper clamp spring loose or loose	1. pin, fastening clamp body 2. the replacement of the same model of the new card
3	maintenance of the brake pads are found to have a serious wear or brake disc wear partial wedge type	As the brake caliper is loose or the back of the brake is caused by bad	1. fasten the clamp body 2. the clamp body guide pillar and plug body lubrication 3. the replacement of the same type of new pliers
4	driving in the direction of the brake when the steering wheel brake deviation	Due to the severe wear of the brake disc is caused by thin	Replace the new brake disc
5	the steering wheel of the steering wheel in the driving state (not braking) is a phenomenon of the brake pedal.	1. due to the friction surface of the brake pad 2. the end of the brake disc is caused by a beat. 3. the front independent suspension of the linkage device in the pull rod pad 4. steering tie rod ball head loose tie in the foot	1. the replacement of the new brake pads 2. fastening bracket and screw on disc 3. the replacement of new rubber pad 4. fastening ball head
6	When the braking force is constant, the vehicle has a feeling of reducing the braking coefficient, and the brake is intermittent and unstable.	1. the friction coefficient at high temperature of the brake plate decreases sharply. 2. brake oil in the air bubbles (mainly clamp body)	1. recommended the use of good performance brake pads 2. should be in time to repair the unit to drain the oil bubble

Packaging & Shipping

1.package:

Neutral packing;

we can also pack according to customer's special request.

2.Shipping:

Within 45 days after receiving deposit.