Product Details

CE ISO 300KW biomass gas generator

1.Our advantage:

1). manufacturer for10 years

2). Adopting advanced control system, the gas engine will be more reliable, and easier to start.

3). Burn methane(green energy) with low emission and environment friendly.

4). Several gas generators can be paralleled together , which can increase the total power range.

5). In addition,the gensets can take maintenance in different times,which will make little influence to the normal performance of gensets.

2.Gas Requirements For Biomass Gas Genset :

1m distance away from genset’s pressure regulating valve of inlet

Gas temperature≤40℃;

Gas pressure 5~20kPa, pressure changing rate≤ 1kPa/min;

H2S≤200mg/Nm3;

NH3≤20mg/Nm3;

Coke tar content≤20mg/Nm3;

Impurities particle size≤5μm; impurity content≤30mg/Nm3;

Moisture Content of biomass ≤40g/Nm3;

gas calorific value≥4.2MJ/Nm3.

Purification of biomass gas have a significant impact on machine life and continuous running time

3. Worksite requirements for generator :
a)  Ambient temperature between -40ºC~45ºC;
b)  Relative humidity less than 90%(35ºC);
c)  Site elevation not higher than 2000m;
d)  For outdoor installation, simple rain shelter is required.

4.Parameters :

Model No.	LHBMG300
Brand Name	LVHUAN
Rated Power	100KW
Rated Speed	1000/1200 RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
output type	AC 3 Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stability time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant consumption	≤1.0g/kw.h
Engine Capacity	12.90 L
Cylinder Number	6
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Chinese Stamford
Power Factor	0.8 lagging
Exciting method	brushless
Colour	Customized
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	2850x1100x1750mm
Weight	8200kg

(Single set power supply range: 10 - 600 kw, ≥2 sets parallel together to form large power, Eg. 500kw*3 sets = 1500KW)

5.Equipment

6.Case

7.Visitor

Our Services

1. Pre-sale service:

A.Our engineers are available for onsite prospect before installation free to charge.

B. Foundation drawing and detailed Dimension free form us.

2. In-sale service:

A. Onsite overall guide installation,operation and maintenance training .

B. Assistance and instruction of trial running.

3. After-sale service:

A.Our engineers are in charge of different area,we will response periodically and support you

technical service free of charge,

B.Free of charge for the quality problem during the guarantee period.

C.One year guarantee period and lifetime service.

4. Spare parts service:

A.All spares parts on our gensets supplied by us.

B. Free spare parts together with genset when shipping.

9.FAQ

1.How to choose the right model ?

A: It depends on real output power, Voltage, Frequency and gas type.

2.What is the oil consumption and capacity per hour?

A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h

3.What is the overhaul ?

A: About 30000 working hours. A week is enough to finish.

4. What is the warranty?

A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare parts are not free. But, a set of spare parts will be shipped together with machine free.

5. How is the service?

A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.

Please feel free to ask question and quotation.