Gas Gensets, buy Main Technical Parameters 200kw Natural Gas Generator CE approved on China Suppliers Mobile

Product Details

General requirement of Gas Generator :

1. Gas source requirement:

Gas inlet pressure: 0.8-2.0kpa (higher water pressure must use decompression machine)

Caloric value : ≥5000 kcal/Nm3 or ≥21MJ/Nm3 (lower heat value will decrease the gen-set power output)

H2S ≤ 20mg/Nm3

Impurity granularity ≤ 5 μm

Impurity content ≤ 30 mg/Nm3

Water content ≤ 40mg/Nm3

CH4 content ≥ 50%

(The gas must be to desulfurize and dehydrate and dust removal before inlet methane generator)

2. Application area:

Biogas generator: dairy and poultry farm, food processing ( starch, alcohol, palm oil ),industrial waste, Bio garbage processing, landfill etc.

Natural gas generator : Pipeline natural gas, liquid natural gas (LNG),coal mine industry, crude oil industry.

LPG generator : Crude oil industry.

Main Technical Parameters 200kw Natural Gas Generator

Technical Sheet

Genset
Model	KD-200GF
Rated power (KW/KVA)	200KW
Rated current (A)	360A
Rated voltage (V)	400/230
Rated frequency (HZ)	50
Rated speed(r/min)	1500/1800
Phases arrangement	3Phase 4Wire
Excitation method	Brushless
Voltage regulation	AVR(Automatic Voltage Regulation)
Gas Engine
Type	four stroke,ECU control high energy spark plug ignition, water cooled
Cylinder No. and layout	4/6/12 inline or Vee type
Rated speed (r/min)	1500/1800
Aspirated mode	Natural or turbocharge intercooled
Speed regulation mode	Electronic governor
Starting method	DC 24V Electrical starting
Cooling method	Closed water cooling cycle
Lubrication method	Pressure and splash lubricating
Fuel consumption(Nm3/kw.h)	0.6 (biogas), 0.3(natural gas)
Alternator
Brand	Stamford or Marathon or Chinese brand
Type	Pure copper brushless
Rated power (KW/KVA)	from 10kw/12.5kva to 1000kw/1250kva
Insulation class	H
Protection class	IP22
Excitation mode	Brushless with AVR
Control Panel
Function : 1. Adopt Gen-set controller with LCD display, taking microprocessor as the core. 2. Adopt ATS( automatic transfer switch) to achieve the automatic transfer from the generated electricity to grid electricity 3. The monitor and display on the voltage, current, frequency, active/apparent power, power factor of the generated electricity /grid electricity etc. 4. The monitor and display on the gen-set’s water temperature, oil pressure, rotational speed, battery voltage, running hours, accumulative total power and number of starts 5. Protection alarm and fault automatic storage on high water temperature, low oil pressure, double speeding, over current, over voltage, over frequency and phase failure etc.

Main Technical Advantages:

1) Valve seat materials are imported special steel, valve use wear-resistant materials and the latest technology.

2) Piston and cylinder head production using new materials, high-performance low-emission hybrid rapid combustion cylinder. Combustion control technology to protect machine film.

3) Change the duration of the ignition control,long-life spark plugs.

4) Intergrated control diagnostics, intergrated approach to control the explosion-proof technology.

Standard Configuration of Gas Generator:

1. New gas engine

2. Radiator 40°C max,fans are driven by belt,with safety guard

3. 24V charge alternator

4. New Alternator(Stamford or Marathon),single bearing, IP22-23, insulation class H,brushless

5. Steel frame base, shock absorber

6. Gas pressure regulator(MADAS,Italy),air and gas mixer(IMPCO,USA)

7. Electronic speed governor and actuator

8. Back-fire relief valve

9. Dry type air filter, oil filter