Specifications

2045MB laptop size hotel safe, digital safe box

1, Lock : Digital
2, open modes : digits + mechanical keys.

Features:
1) Password: 1 - 10 digits
2) Open: password,overide mechanical key
3) Thickness:
a) Door: 5mm
b) Wall: 2mm
4) Product dimensions (H x L x D): 200 x 450 x 400mm

Packing:
Packing dimensions (H x L x D): 215 x 470 x 450mm1
N.W.: 16kg

Re: It is very practical and strong and easy to operate,we can supply the best service to you until you are satisfying.

1)        Double codes system: personal code (4-digits), master code (6-digits).

Factory settings: personal code: “1234”; master code: “888888”.

2)        Opening

Input factory setting personal code or master code, when press the button there will be a beep. The LED displayer will show “open” when the code is correct, otherwise, it will show “E-code”.

Close the door:

if you press “ LOCK” within 10 minutes after open the door, then “CLOSED”, if you press “ LOCK” after opened the door 10 minutes or more, or you opened the door by master code, the displayer will show “E-CODE”, you can not close the door, you should input personal code (4-digits) and press “lock” key, the displayer will show “CLOSE”; when the door closed it will show “CLOSED”, then show the codes.

3)        Code setting

1. Change master code:

under opening position, input original manage code and press “lock” , when the displayer shows “NEU”, you can input a new master code;  then press “lock”, if it succeed the LED will show “OK”, indicates the master code has been changed.

2. Change personal code:

under opening position ,then input 4 new digit personal code when close the door, press “lock” , the displayer will show “CLOSE”, then “CLOSED”, and then the new personal code, indicates the personal code has been changed.

4)        Emergency opening:

If forget personal code or other reasons make the safe can’ t be opened, you can use emergency key or override master code to open the door.

5)        Code hidden function:

press “Reset / Clear” two times, then press “lock”, it will come into hidden function, when you input the codes, it only show “0” on the displayer.

6)        Cautions:

1. Hold: if input incorrect code 3 times, the safe will be held for 15 minutes, during this period, it will no response press any key, and show “Hold+digit”, the digit is the holding time. After 15 minutes, it will recover to normal situation.

1. Low voltage: when it lowers than 5V, whether open or close, it will show “LO-BAT” on the displayer.
2.  “Reset” is also a deletion key, press one time will delete one digit.