Specifications

2.2mm*2.7mm Oval Galvanized Steel Wire
1.Diameter: 2.2*2.7mm
2. 600kgf, 700kgf, 800kgf
3.Brazil Market specialize

Galvanized Steel Oval Wire for cattle fence

 

Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.

Nominal Diameter	Minimum Coating Mass (g/m2)
	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.45mm * 5.25mm	50 50 50 50 35	90 90 90 90 50	230 230 230 230 230

Tensile Strength (Mpa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

Nominal Wire Diameter	Bread Loading (kgf)
	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm	600 600 600 600 600	800 800 800 800 800	870 870 870 870 870

 

Nominal Wire Diameter	Packing (meter)
	1	2	3
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm	500 500 500 500 500	1000 1000 1000 1000 1000	1200 1200 1200 1200 1200

Steel Chemistry

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

Tensile Grade	% Carbon	% Phosphorus	% Manganese	% Silicon	% Sulphur
Normal	0.45~0.50	0.032	0.5 ~1.00	0.10~0.34	0.041
High	0.59~0.63	0.035	0.5 ~1.10	0.10~0.35	0.045