Non-pressure/Low pressure solar water heater
We are a professional manufacturer of solar water heater products with CE CCC and ISO9001:2000 certificates from Haining,China.
Descriptions for non-pressurized solar water heater
1.Inner tank material: SUS304-2B food grade stainless steel,thickness:0.4mm
2.Outer tank material: Stainless steel 304-2B,thickness:0.31mm(Galvanized steel is available,thickness:0.35mm)
3.Bracket: 1.5mm stainless steel(Galvanized steel is available )
4.Vacuum tube: Three layer vacuum tube. 58mm diameter, 1800mm length
5.Insulation layer: 50mm polyurethane foam.
6.Obliquity of the solar water heater bracket: 30,45,60,etc;
7.Working efficiency for non-pressure solar water heater: 2-3 hours for 70- 90 °C for 100 liters.
How Solar Water Heater works:
Solar Water Heater relies on warm water rising, a phenomenon known as natural convection, to circulate water through the evacuated glass tube collector and to the tank. Hot water storage tank is located above the absorber evacuated glass tubes. As water in the absorber heats, it becomes lighter and naturally rises into the tank above. Meanwhile, cooler water in the tank flows downwards into the absorber, thus causing circulation throughout the system.
Solar Water Heater Tube Specification:
Solar Water Heater vacuum Tube | Three layer vacuum tube |
Structure | All-Glass Double Tube Co-Axial Structure |
Glass Material | High Borosilicate 3.3 Glass |
Pipe Length | 1500mm, 1800mm,2000mm |
Diameter | 47mm,58mm |
Life time | 15 years |
Descriptions:
1.stainless steel 304-2B for inner and outer tank,longer use life.
2.cost no electricity when sunshine is good enough,electrical heater as back-up for solar water heater when bad weather.
3.3 layers vacuum heat colected tube for the solar water heater,more efficient; purple golden,looks nice.
4.non-pressure solar water heater can be used in area lower than -5 °C,more colder,heat pipe as alternative.
5. past CE,CCC,ISO 9001 test.
Mayca Solar,waiting for your early cooperation in solar water heater line!