small vehicle rubber track system. Continuous track, also called tank tread[1] or caterpillar track, is a system of vehicle propulsion in which a continuous band of treads is driven by two or more wheels. small vehicle rubber track system. This band is typically made of modular steel plates in the case of military vehicles, or rubber reinforced with steel wires in the case of lighter agricultural or construction vehicles. The large surface area of the tracks distributes the weight of the vehicle better than steel or rubber tyres on an equivalent vehicle, enabling a continuous tracked vehicle to traverse soft ground with less likelihood of becoming stuck due to sinking. The prominent treads of the metal plates are both hard-wearing and damage resistant, especially in comparison to rubber tyres. The aggressive treads of the tracks provide good traction in soft surfaces but can damage paved surfaces. Special tracks that incorporate rubber pads can be installed for use on paved surfaces to prevent the damage that can be caused by all-metal tracks. small vehicle rubber track system. Continuous tracks can be traced back as far as 1770 and today are commonly used on a variety of vehicles including bulldozers,excavators, tanks, and tractors, but can be found on any vehicle used in an application that can benefit from the added traction, low ground pressure and durability inherent in continuous track propulsion systems.In modern times, continuous track propulsion systems can be traced back to a crude continuous track system designed in the 1770s byRichard Lovell Edgeworth. Polish mathematician and inventor Józef Maria Hoene-Wroski conceived of the idea in the 1830s.[2] The British polymath Sir George Cayley patented a continuous track, which he called a "universal railway".[3] In 1837, a Russian inventorZagryazhsky designed a "carriage with mobile tracks" which he patented the same year, but due to a lack of funds and interest from manufacturers he was unable to build a working prototype, and his patent was voided in 1839. small vehicle rubber track system. Small tracks on a roadworks machine, note the rubber pads to reduce wear on the carriageway.Bandvagn 206 (Bv 206) is a tracked articulated, all-terrain carrier developed by H?gglunds (now part of BAE Systems Global Combat Systems) for the Swedish Army. It consists of two units, with all four tracks powered. It can carry up to 17 people (6 in the front compartment, 11 in the rear), and the trailer unit can be adapted for different applications (see Variants section). Development of the Bv 206 all-terrain articulated tracked carrier began in 1974. Three batches of trial vehicles were delivered between 1976 and 1978 and the first production examples were delivered to the Swedish Defense Administration in 1980. We always have a large Stock of Used / Refurbished H?GGLUND BV206 ATV's available. We stock and supply Used / Refurbished H?GGLUND BV206 All Terrain Vehicles to customers all over the world from tropical climates to the icy tundra of the polar regions. small vehicle rubber track system.Rubtrack Tracked Vehicle Systems Co., LTD specialized in development and manufactures a variety of rubber tracks, rubber track systems and related replacement parts, such as road wheels, drive sprocket, idler, track roller, bearing collar, wheel fork, etc. With over 10 years experience in supply and manufacture high quality replacement components for the H?GGLUND BV206 tracked drive system and other all-terrain vehicle transportation in snow, mud, swamps and other harsh terrains. Rubtrack's products are widely used in engineering machine, construction machine, transportation machine, landscape maintenance machine, garden machine for industrial, agricultural and defense vehicles.

Wholesale small vehicle rubber track system Rubber Track Conversion System

for ATV, SUV, CAR, TRUCK, etc

APPLICATION:

4x wheel drive cars with smaller wheel arch, such as:

Subaru Legacy
Impreza
others

We also supply conversion systems for vehicles in different weight as follows. 

small vehicle rubber track system Rubber Track Conversion System

for ATV, SUV, CAR, TRUCK, etc

With aluminum rollers, reinforced frame and reinforced Hub nod!

With this drive system, go anywhere you want! 

ATV / UTV conversion system kits It's an integrated mechanical assembly which can make your vehicle go anywhere even harsh terrains, i.e.: ice, snow, mud, sand, foresty,  swamp, rocks, etc.
1pc of small vehicle rubber track system kit=1 pc rubber track + 1 pc steel drive sprocket + 5 pairs of road wheels.

We can also design the mounting hole according to your wheel bolt pattern so that you can Install it on your car directly without using complicated tools.

Ask us the YouTube Link to see our

ATV Track Snowfield Test Video!

NO OBLIGATION ASK!!

We're manufacturer! 

Contact us NOW to Get a Quote!

NO OBLIGATION!