15-35kV ANSI Distribution composite suspension long rod insulator
1.Polymer Insulator Character:
1.1high mechanical strength;
1.2Good performance of hydrophobicity and anti-pollution;
1.3 Excellent electrical Performance;
1.4 Small volume and light weight.
2.TID polymer Insulator Character:
2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.
2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm .
2.3 We use ECR rod as the core which is high acid resistant.
2.4 We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 86μm.
2.5 We adopt the advance fitting crimping producing technology .
2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.
2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.
3.Main Parameter:
No. | Part No. | Rated Voltage | Tensile Load | Section Length | Creepage distance | Power Frequency Withstand Voltage | Lighting Impulse Withstand Voltage | Applied Standard | |
Dry | Wet | Pos.. | |||||||
1 | FXB-15/70 | 15 | 70 | 343 | 365 | 90 | 65 | 140 | ANSIC29 |
2 | FXB-28/70 | 24 | 70 | 445 | 550 | 130 | 100 | 190 | |
3 | FXB-3570 | 33 | 70 | 541 | 730 | 145 | 130 | 250 | |
4 | FXB-46/70 | 46 | 70 | 590 | 900 | 180 | 145 | 280 | |
5 | FXB-69/70 | 69 | 70 | 750 | 190 | 220 | 185 | 360 | |
1. Economic Packing desgin which will save your transportation cost.
2. Suitable packing material ( Non fumigaion ) and beautiful package workmanship which will well protect the goods and avoid any trouble when you pick up the goods from the local customs.
1. We offer full solution of Technical support.
2. We offer customized Products.
3. We offer Multilingual service.