Professional Digital Air Pressure Meter & Manometer to Measure Gauge & Differential Pressure 10PSI/68.94Kpa/276.7InH20 (TL-102)
USD $18 - $24 /Piece
Min.Order:100 Pieces
Dongguan Xinrui Instrument Co., Ltd.
digital dual-port Pressure gas Manometer 10Psi/68.94kPa/ 276.7inH2o from China supplier TL-102
Professional Digital Differential Air Pressure Manometer /Gauge TL-102 (10PSI)
TL-102 Large LCD 10 PSI Digital Manometer Air Pressure Meter Gauge with factory price
TL-102 Newly design digital differential pressure indicator with factory cheapest price
Professional Digital Air Pressure Meter & Manometer to Measure Gauge & Differential Pressure 10PSI/68.94Kpa/276.7InH20 (TL-102)
It features 11 selectable units of measure: in H2O, pis, bar,mbar,Kpa,inHg,mmHg,ozin2,ftH2O,kgcm,
additional features include data hold and auto power off disabled,careful use of this meter will provide years of reliable service.
Features:
1.Max / minimum / average, and with a relative time
2.Large LCD backlit dual display
3.Zeroing, offset, and data compensation
4.Low battery display and automatic shutdown
5.Data Hold and Error code
6.9Vbattery
7.Client can calibrate the meter by oneself
Specifications:
1.Pressure Range:+10Psi (TL-102) **please mind the range ****
2.Accuracy:+0.3% FSO (at 25oC)
3.Repeatability: +0.2% (Max+0.5%FSO)
4.Linearity/Hysteresis:+0.29% FSO
5.Response Time:0.5Seconds Typical
6.Over Range Indicator:Hi
7.Under Range Indicator:Lo
8.Operating Conditions:0 to 50oC(32 to 122oF)
9.Storage Conditions:-10 to 60oC (14 to 140oF)
10.11 Selectable units of Measure
11.Max / minimum / average, and with a relative time
12.Large LCD backlit dual display
13.Zeroing, offset, and data compensation
14.Low battery display and automatic shutdown
15.Data Hold and Error code
16.9Vbattery
17.Client can calibrate the meter by oneself
Function | Range | Resolution | Function | Range | Resolution |
kPa | 68.94 | 0.01 | inHg | 20.36 | 0.01 |
Psi | 10 | 0.01 | mmHg | 517.1 | 0.1 |
Kgfcm2 | 0.703 | 0.001 | InH2O | 276.7 | 0.1 |
Ozin2 | 160 | 0.01 | FtH2O | 23.06 | 0.01 |
Bar | 0.689 | 0.001 | cmH2O | 703 | 0.1 |
Mbar | 689.4 | 0.1 |
|
|
|
Product description
1.1.Tube Connector (+)
2.1.Tube Connector (-)
3.LCD Display
4.4.HOLD/Backlight button
5.REC Button
6.Power on/off Button
7.DIF Button
8.UNITS Button
9.Battery Cover
LCD display
1.Data Hold Function
2.Differential Pressure Mode
3.Power Symbol
4.MAX/MIN/AVG indicator
5.Low Battery Symbol
6.Pressure Units
Operation
1.Power on/off
Press Power on/off button to turn on or off..
The meter will auto power off in 10 minutes without any operation.
Press HOLD button and Power on/off button together to turn on the meter,the Power symbol will
Appear on the display.the meter won’t auto power off until the battery run out.
2.Data Hold Function
Press the HOLD button to freeze the reading momentarily.
Press the HOLD button again to return the nomarl mode
3.Record Function
When turn on the instrument,it already starts recording the MAX/MIN/AVG reading.
Press the REC button to display the max reading,min reading ,average reading
.4.Backlight
Press the HOLD/Backlight button voer 2sec to turn on/off the backlight.
5.Unit Selection
Press the UNITS button to choose the suitable unit.
6.Over Range
HI symbolwill appear on the display when the pressure value over the Max range
LO symbol will appear on the display when the pressure below the MIN range
8.Calibration
Hold RECand DIF button together and then turn on the instrument to enter the calibrationmethod directly:
a.Zero adjust
Press REC and DIF button at the same time,the reading will be -00.00.
b.Data adjust
Connect the pressure calibrator then input a standard pressure value(kPa),and then adjust the reading the same as the standard pressure value.
*REC button (←);DIF button(→);HOLD button(↑);UNITS button(↓)
Battery Replacement:
If the meter does not power on as usual or the low battery icon appears on the LCD display, please replace the batteries with a new 9V battery as soon as possible.
Dispose of the battery in an environmentally safe at a recycling point.
DO NOT DISPOSE OF IN YOUR BIN!
Trouble Shooting:
1. Power on but no display or the display disappears
a. Check the battery is in place with good contact to the pins and the correct way round.
b. Remove battery for one minute and re-install.
c. Replace the battery.
2. For all other issues please contact your supplier.
Certification:
Dongguan Xinrui Instrument Co.,Ltd is a high-tech enterprise, which is focused on developing,manufacturing and exporting of kinds of instruments with the strong R&D and professional sales processions.
Our compnay specializing in manufacturing and saling of instrumental products like Infrared Thermometer, Sound Level Meter,Manometer, Anemometer, Humidity and Temperature Meter, Lux Meter, Distance meter,Vibration meter,Film/Coating Thickness Gauge ,Ultrasonic Thickness Gauge and so on,and also we always constantly release more than 10 kinds of new products every year.
The professional R&D teams can satisfy all of customer's requirements,and can constantly work on new products to meet the continuous renewal market. All products have CE,RoHS and another certificates .the most important thing is that we have rich experience in OEM & ODM service,so we can finish any order according to customers' request fastly with the best quality and price.
To realize all customers' goals is our final aim,so we sincerely welcome all channel partners to join us to make promising brand-new future together.