Specifications

adapter sleeve H204
1. Model: H2304
2.chrome steel
3.over 10 years experience
4.good quality

 adapter sleeve  H204

 

Adapter sleeve  H204 catalogue:

 

Ltem NO	Dimensions mm						W.1(kg)	lOCK NUT	Lock washer	No
	d1	d	d2	B1	B2	G
H202	12	15	25	19	6	M15×1	0.24	KM2	MB2	H202
H302	12	15	25	22	6	M15×1	0.026	KM2	MB2	H302
H2302	12	15	25	25	6	M15×1	0.032	KM2	MB2	H2302
H203	14	17	28	20	6	M17×1	0.03	KM3	MB3	H203
H303	14	17	28	24	6	M17×1	0.036	KM3	MB3	H303
H2303	14	17	28	27	6	M17×1	0.042	KM3	MB3	H2303
H204	17	20	32	24	7	M20×1	0.36	KM4	MB4	H204
H304	17	20	32	28	7	M20×1	0.04	KM4	MB4	H304
H2304	17	20	32	31	7	M20×1	0.05	KM4	MB4	H2304
H205	20	25	38	26	8	M25×1.5	0.064	KM5	MB5	H205
H305	20	25	38	29	8	M25×1.5	0.071	KM5	MB5	H305
H2305	20	25	38	35	8	M25×1.5	0.085	KM5	MB5	H2305
H206	25	30	45	27	8	M30×1.5	0.086	KM6	MB6	H206
H306	25	30	45	31	8	M30×1.5	0.095	KM6	MB6	H306
H2306	25	30	45	38	8	M30×1.5	0.11	KM6	MB6	H2306
H207	30	35	52	29	9	M35×1.5	0.12	KM7	MB7	H207
H307	30	35	52	35	9	M35×1.5	0.14	KM7	MB7	H307
H2307	30	35	52	43	9	M35×1.5	0.16	KM7	MB7	H2307
H208	35	40	58	31	10	M40×1.5	0.16	KM8	MB8	H208
H308	35	40	58	36	10	M40×1.5	0.17	KM8	MB8	H308
H2308	35	40	58	46	10	M40×1.5	0.22	KM8	MB8	H2308
H209	40	45	65	33	11	M40×1.5	0.21	KM9	MB9	H209
H309	40	45	65	39	11	M40×1.5	0.23	KM9	MB9	H309
H2309	40	45	65	50	11	M40×1.5	0.27	KM9	MB9	H2309
H210	45	50	70	35	12	M45×1.5	0.24	KM10	MB10	H210
H310	45	50	70	42	12	M45×1.5	0.27	KM10	MB10	H310
H2310	45	50	70	55	12	M45×1.5	0.34	KM10	MB10	H2310

 

Adapter sleeve  H204 introduction:

Adapter sleeves are used for securing tapered bore bearings on to the cylindrical shafts, it easy mounting and dismounting

1. Adapter sleeves are used for securing tapered bore bearings on to the cylindrical shafts. They facilitate easy mounting and dismounting. They are suitable for both smooth and stepped shafts. The sleeves can easily adapt to the shaft diameter.

2. The adapter sleeves have slotted design and an external taper. They are usually not surface treated but oiled and are supplied with a lock nut and a locking device. They have an oil duct, distribution groove, and a threaded side. For stepped shafts, they have two supply ducts and distribution grooves on the outer surface.

3. Withdrawal sleeves are used for mounting tapered bearings on to the cylindrical shafts. They facilitate easy mounting, securing and dismounting. They are suitable for both smooth and stepped shafts. Bearing sleeve can easily adapt to the shaft diameter. They are usually coated with a preservative, are slotted and have an external taper. This allows the sleeve to be used with wide spherical roller bearings. Withdrawal sleeves for oil injection have oil ducts and distribution grooves, on the threaded side.

4. We supply the Adapter Sleeves in accordance with ISO H3/1-1979, both Metric and Inch.

 

Adapter sleeve  H204 factory:

If there is anything I can do for you, feel free to contact me please. :)