All other ordinary inverter require at least 150ah battery to work so even if you need small back-up time of 5-10 mins you have to spend big bucks to buy big battery. If you want to use falcon plus with a small battery of 25ah, set the dip switch in back panel to 2.5 amps. For using it with 150ah battery, slide the switch to 15 amps.

While ordinary inverter’s fuse blows during overload, Falcon plus comes with a special fuse which can be reset with a simple push. When Falcon plus detects overload it beeps 8 times (before shutting down) alarming you about the overload. After you switch the extra load off, you simply have to push its resettable fuse – it will start working again. It will not harm the connected appliances or itself.

Falcon plus has a crest factor of 5:1 which means it can take load which is 5 times heavier than its capacity for a short period of time.

For the first time ever, a home inverter can do microprocessor based 6 stage charging. Multi-level charging is the best way to charging your batteries. Increases the battery’s life, makes charging faster. Ordinary inverters can only do 3 stage charging.

Falcon plus can continue charging your batteries even when the voltage is as low at 90V.

Low Voltage Disconnect (LVD) features lets you decide the level of battery reserve you wish to have. If you wish to fully extract the energy stored in batteries, you can slide this dip switch towards 10.5 but if you would like to keep more reserve then slide it to 11v. In either of the cases it never lets the battery reserve drop more than 10.5. This increases your battery’s life.

Display: 

Graphical LED Display

Power Switch Activation

5 LED’s Display’s

Operation Mode

State of Charge

Fault Message