Specifications

Raw material for furniture mdf fibreboard
1) Size:1220/1830x2440mm
2) Thickness:2.5-25mm
3) Material:Poplar
4)MOQ 1x20cont

Melamine wood mdf fibreboard   

 

MDF is the man-made sheet, using the qualified logs as raw material, cooked to
soften and smash, and pressed with urea-formaldehyde resin and other adhesive.
The character of MDF is of good physical properties and processing performance,
low cost, high utilization and simple processing, being suitable to furniture manufacturing, architectural decoration, sports, wall panels on the ground, partitioned etc.

 

1).Surface
 best sanding or pressing melamine paper: matt, glossy, texture, bump
 
2).Formaldehyde Emission
 E0, E1, E2
 
3).Density
 720~860kgs/cbm
 
4).Melamine paper
 solid color(white, red, blue, green etc. ) & wooden grain color( cherry, oak, ash, walnut, maple, birch etc. )
 
5).Melamine paper grammer
 70~120g/m2
 
6).Internal bond
 >= 0.55 Mpa
 
7).Modulus of elasticity
 ≥ 2200Mpa
 
8).Screw holding
 Face: ≥ 1000N, Edge: ≥ 800N
 
9).Moisture contents
 4-13%
 
10).Bending strength
 ≥ 20Mpa
 
11).Water absorption
 ≤ 10%
 
12).Surface bond strength
 ≥ 1.2Mpa
 
E0 ≤0.5 mg/l (By dryer test)

E1 ≤9.0mg/100g (By perforation)

E2 ≤30mg/100g (By perforation)

 

contact way :
Skype : Gordon_zhangdh
Tel      : 0086 15601194258