FSM-60S

Parameters

Applicable type of fibers

SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)

and other single mode fibers including ITU-T G.657 fibers.

Fiber count

Single

Cladding diameter : 80 to 150µm

Fiber setting and cleaved length

Coating diameter : 100 to 1000µm

Sheathe clamp A (Standard) : For coating dia. up to 250mm (8 to 16mm cleave), coating dia. of over 250mm(16mm cleave)

Sheathe clamp B(option) : For coating dia. up to 1000mm (8 to 16mm cleave)

Sheathe clamp C(option) : For 900mm dia. loose tube fiber (8 to 16mm cleave)

Fiber holder (option) : FH-60-250, FH-60-900 (10mm cleave)

Splicing modes

Total 100 modes

Typical splice loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS. (Measured by cut-back method relevant to ITU-T standard).

Return loss

>>60dB

Splicing time

Typical 9sec.with SM FAST, 10sec.with SM AUTO and 13sec.with AUTO modes with standard SM(ITU-T G.652).

Splice loss estimate

Available

Attenuation splice function

Intentional high splice loss of 0.1dB to 15dB ( 0.1dB step ) can be made for an in-line fixed attenuator.

Tube heater / heating time

Built-in tube heater with 30 heating modes. / Typical 30sec with Fujikura FP-03.

60mm, 40mm and Fujikura FPS01 series.

Storage of splice result

The last 2000 results to be stored in the internal memory.

Tension test

1.96 to 2.25N

Operating condition

0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively.

Storage condition

0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term.

Dimensions

136W × 161D × 143H [mm] excluding rubber foot.

Weight

2.3kg with AC adaptor ADC-13, 2.7kg with battery BTR-08.

Viewing method and display

Two CMOS cameras and 4.1" color LCD monitor.

Fiber view and magnification

X / Y (300X magnification), or both X and Y simultaneously (187X magnification).

Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08.

No.of splice cycles with battery

Typical 160 cycles (splice / tube heat) with BTR-08.

Electrode life

2500 arc-discharges

Terminals

USB 1.1 (USB-MiniB type) connector for PC communication.

6-pin Mini-DIN connector for HJS-02/03 or SH-8S/R/C power supply.

Description

Model No.

Q'ty

Fusion Splicer

FSM-60S

1pc.

With CLAMP-S60A, ELCT2-20A and WPM-08

AC adapter / battery charger

ADC-13

1pc.

AC power cord

ACC-XX

1pc.

Spare electrodes

ELCT2-20A

1pair

USB cable

USB-01

1pc.

Quick reference giude

M-60S/18S-E

1pc.

Video instruction manual (CD)

V-60S-E

1pc.

Warning and Cautions

W-60-E

1pc.

J plate

JP-05

1pc.

Carrying case

CC-24-60S

1pc.