Specifications
12/15MM Standard Wooden Medium Density Fibreboard 1).1220/1830*2440mm;2) Thickness:12-25mm ;
3) Material:Poplar ;
4) CARB P2
12/15MM Standard Wooden Medium Density Fibreboard
Specification:
1)Surface
Best sanding or pressing melamine paper: matt, glossy, texture, bump
2)Formaldehyde Emission
E0, E1, E2
3)Density
720~860kgs/cbm
4)Melamine paper
solid color(white, red, blue, green etc. ) & wooden grain color( cherry, oak, ash, walnut, maple, birch etc. )
5)Melamine paper grammer
70~120g/m2
6)Internal bond
>= 0.55 Mpa
7)Modulus of elasticity
≥ 2200Mpa
8)Screw holding
Face: ≥ 1000N, Edge: ≥ 800N
9)Moisture contents
4-13%
10)Bending strength
≥ 20Mpa
11)Water absorption
≤ 10%
12)Surface bond strength
≥ 1.2Mpa
13)Formaldehyde emission
E0≤ 3 mg/100g, E1≤ 9mg/100g, E2≤ 30mg/100g
14)Performance
MDF is the man-made sheet, using the qualified logs as raw material, cooked to
soften and smash, and pressed with urea-formaldehyde resin and other adhesive.
The character of MDF is of good physical properties and processing performance,
low cost, high utilization and simple processing, being suitable to
furniture manufacturing, architectural decoration, sports, wall panels on the
ground, partitioned etc.
