Multi-mode Module Type Fused Fiber Optic Splitter Characteristics:

1. Different combinations of coupling ratio
2. Low crosstalk & excess loss
3. High optical return loss
4. Available in dual/three wavelength operation
5. Optional connectors termination upon request
6. Available in 250um & 900um fiber, 2mm or 3mm

Multi-mode Module Type Fused Fiber Optic Splitter Application:

1. FTTH, LAN, PON & Optical CATV
2. Local ring net, Optical fiber communication system
3. Optical fiber test equipment, Optical fiber sensor

Multi-mode Module Type Fused Fiber Optic Splitter Brief Introduction

Fiber optic splitter, also called optical splitter, fiber optic coupler, is a device used in optical fiber systems with one or more input fibers and one or several output fibers. There are mainly two types of optical splitters. One is fused splitter (FTB), The other is Planar Light-wave Circuits (PLC Splitter).For the fused optical splitter, It can be divided into different ratios. such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other. Planar Light-wave Circuits (PLC Splitter) can’t work with different ratio rather than it provides a accurate splitting in high-density output (like 8,16,32,64 outputs). However, The most common type of fiber optic splitter splits the output evenly, which is coming out with the same output of light signals. As a result of its great function, Optical splitter is a very important part in passive optic networks (PON).

Multi-mode Module Type Fused Fiber Optic Splitter Pictures:

1. 

   Multi-mode Module Type Fused Fiber Optic Splitter

Multi-mode Module Type Fused Fiber Optic Splitter Paramters: