Name: BHY T8 T10 20W 40W 18W 36W explosion proof front access fluorescent fitting
Brand: FPFB
Availability: InStock

Product Details

BHY BHY T8 T10 20W 40W 18W 36W explosion proof front access fluorescent fitting

Product Description

1. Can be used in hazardous areas: Zone 1 and Zone 2 .

2. Can be used in explosive gas atmospheres of Category II A and II B and II C where the temperature classification is T1-T6.

3. Lamp options: high light, fluorescent lamp.

4. widely using in the fields of oil, chemical industry , spaceflight ,war industry and so on.

5.Can be fitted with T10 single-pin and T8 T5bi-pin bube as lighting source.

6.Can be fitted with emrgency device on per request.

7.Emergency lighting duration is obove 90min.

Voltage

Charging time

Emergency start time

Emergency ligting time

Ex-mark

Degree of protection

Erosionproofclass

cableouterline

AC220v

≤24h

0.3s

>90min

Exed II CT5 Gb,

DIP A21 TA, T5

IP65

WF1

WF2

Φ 9- Φ 14

APPlications:

Suitable for explosive gas environment Zone1 and Zone2.
Suitable for IIA,IIB,IIC explosive gas environment.
Suitable for Hazarous dust area: Zone20, Zone21, Zone22.
Can be used in the environment of temperature group for T1~T5.
T10 Single-pin and T8, T5Bi-pin tube as lighting sources.
It can be fitted with emergency device on request.
Designed for petroleum explosion, refinery, storage, chemistry, medicine, military etc. sites with potential explosive atmosphere.

Techinical parameters:

Meet a criterion:G3B3836.1, GB3836.2, GB3836.3, GB12476.1, IEC60079-0,IEC60079-1, IEC60079-7, IEC61241-1, EN60079-0, EN60079-1,EN60079-7, EN61241-1,
Ex-proof Mark:Exed II CT5 Gb, DIP A21 TA, T5.
Rated voltage: AC220V
Ligting Source: T10 Single-pin tubes(1×20W,2×20W,1×40W,2×40W)
T8 Bi-pin tubes(1×18W,2×18W,1×36W,2×36W)
T5 Bi-pin tubes(1×14W,2×14W,1×28W,2×28W)
T5 and T8 LED tube(1×9W, 2×9W,1×18W,2×18W)
Detail Plz refer the blew table.
Protection grade:IP54,IP65
Corrosion-proof grade:WF2,WF1
Inlet Thread: G3/4"
Cable outer dia:9mm~14mm
Battery charging time:≤24h
Emergency Start time:≤0.3s
Emergency lighting duration:≥90min

Product Features:

Steel plate or stainless steel Enclosure, high voltage electrostatic powder coated surface.
Transparent bubble high strength impact resistance, good pervious to light
Exposed fasteners are of stainless steel.
Take name brand fluorescent tube with long service life and high light efficiency.
For fitting with emergency unit, It will automatically turn to emergency lighting when power circuit failed.
Inside the emergency unit designed with over charging and over discharging protection circuit.
Steel conduit or cable wirings.

Order Information :

Lamps has factory configuration light source, can be used directly access power;
Take emergency unit, installation only ceiling type and boom type applicable;
When double tube fluorescent lamp start emergency unit, Only one tube work.
Stainless steel material is available as per request,
Upward opening model is available as per request, this upward opening model is convenient for maintain in the back from the ceiling no need front opening.

Selection Table:

Product Details