I. Description of down pipe roll forming machine:

Down Pipe Roll Forming Machine with Production for Rain Water Storage Solution

Downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to the ground, also referred to as Leaderpipe, Downpipe, or Drainspout. The downspouts are more and more widely applied in rain water storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective on-site alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eaves troughs, which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly into the storm sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner

Our roll forming line of downspout machines run copper, steel, or aluminum. These are also ideal for piping for the HVAC industry for small sizes ductwork.

II. Main features of downspout roll forming machine:

The whole production line is controlled by PLC;

The downspout roll forming machine mainly consists of decoiler, roll forming system, cutting equipment, protective guard, hydraulic system, control system and out table. It can make curve for down pipe to meet the requirement of practical engineering projects.

III. Technological process of downpipe roll forming machine:

Uncoiling---Feeding---Leveling---Punching----Roll forming---Cutting---Products collecting

IV. Technical parameters:

Steel thickness: 0.5-0.8mm

Forming speed: 8-10m/min

Roller stands: 20 stand

Roller material: 45# steel, coated with chromeMain motor power: 3kw

Shaft diameter: 80mm

Hydraulic cutting power: 7.5kw

Hydraulic pressure: 12Mpa

Power supply: 380V 50HZ 3 phase

Tolerance: 1.5mm

Material of cutting: Cr12

Control system: PLC with touch screen

Machine net weight: 10T