I. Description of tube mill:

Tube mills produce pipe and tube by taking a continuous strip of material and continuously rollforming until the edges of the strip meet together at a weld station. At this point the welding process melts and fuses the edges of the tube together and the material exits the weld station as welded tube.

The welded pipe making machine, also called welding pipe making machine or pipe making machine, is used to produce different types of products, such as round types, square types, and rectangular types. The equipments use roll pass design, so the production line can produce welded steel pipes which has the feature of good quality machining and precision assembling.Our World Technology Machinery Company is expertise to producing the welded pipe making machine, therefore, different diameter and wall thickness are available. At the same time, we can design and produce products in accordance with clients’ requirements.

II. Process flow:

Uncoiler---Pinch leveler---Shear and end welder---Strip accumulator---Forming entry---Forming section---Welding section---Cooling box--- Sizing section---Straightening machine---Cut off machine---Run out table---Packing machine--Warehousing

III. Main technical parameters:

Raw material: CRC, HRC, galvanized steel, low alloyed steel

I.D. of strip: Φ450-Φ610mm

O.D. of strip: Φ450-Φ610mm

Coil weight: ≤1.5Tons

Strip width: Min.40 mm, Max.100 mm

Strip thickness:0.5-2.5 mm

Dia. of round tube: Φ12-Φ32 mm

Wall thickness of round tube: 0.5-2.5 mm

Size of square tube: 10×10-25×25 mm

Wall thickness of square tube: 0.5-2.0 mm

Size of rectangular tube: 10×20-16×32 mm

Wall thickness of rectangular tube: 0.5-2.0 mm

Tube length: 4000-8000 mm

Line speed: 50-100 m/min

Electric installed capacity: main motor power: 90kw, high frequency power: 150kw

Cooling water capacity:20m3/hour, 3-5 Kg/cm2

Compressed air capacity: 2 m3/min, 4-7 Kg/cm2

Workshop size(L×W×H): 60×12×5 m((more than 5m from crane runway to ground)

Overhead crane: Two sets of 5T crane

IV. Line composition:

Uncoiler, pinch and leveler, hydraulic shear and end welder, strip accumulator, forming and sizing unit, cut off machine, run-out table, end facing and chamfering machine, packing machine, 150kw solid state high frequency welder, DC speed-adjusted