Product Details

Domestic Sun Energy Solar Water Heater

1. Working pricinple:

Non-pressure system is based on the natural circulation-thermosiphon phenomenon. It is the most economical type of solar systems for hot water application. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down. The water in the storage tank will be heated from this natural circulation. Asisstant tank can load water automatically.
It has the feature as the most economic type. It wan work indepently as well as work together with controller. Electric heater can be installed when it is rainy or claudy day. As the below picture shows:

2. Detail specification:

Model	JNNP	Collector	58-1800-24
Inner tank material	0.4mm SUS3042B	Test pressure	50KPa
Outer tank material	0.4mm Color steel	Hail resistance	25mm
Outer tank diameter	460mm	Coating material	ALN-SUS-CU
Insulation layer	50mm	Heat preservation	72 hours
Frame	1.5mm galvanized steel	Suitable for no. persons	3~5
Frame angle	45 degrees	Applicable to	residential
Assistant tank capacity	5L	Optional accesories	Electric heater, magnesium bar, controller
Total capacity	240L	Total measurement	1 m³
Tank capacity	200L	20'GP/40'GP/40'HG loading	32/65/83
Inner tank Welding	Argon arc welding	OEM offered	YES

3. Making Process:

Packing and Loading:

4. Optional accesories:

5. Installation common troubles and shooting methods

Phenomena	cause Analysis	Methods
Cold water on sunny day	1. There is something above water tank or dense smog or stained 2. The inlet valve fasten incompletely and cold water take the place of hot water in tank	1. Remove the hinder or install another place 2. Change inlet valve
Fail to fill water fully	1. Low pressure of running water 2. Leakage of inlet pipe 3. Leakage of water tank	1. Install a small water pump 2. Change inlet pipe 3. Replace a water tank
Leakage from the tank	1. Broken of seal or water tank installed incorrectly 2.The crack of inner tank	1. Exchange a new seal or adjust the water tank 2. Replace a water tank
Unstable water temperature	Unstable pressure of running water	Adding an assistant tank that can store water, stable the pressure and mix cold water or using a thermostatic valve
Failed to get hot water in winter	1. Frozen of inlet or outlet pipe 2.It's too cold 3. No insulation through pipes	1. Asking for help from supplier 2. When hot water used at night, please let water tank empty and input water next morning 3. Open the heater valve to keep worm at the coldest days