Product Details

Specifications

1) Frame angle: 0-70 degrees; 2) Easy operation Fashinable 3)5 years warranty

Verstellbarer Winkel hohem Druck Solarkollektor

Model: JNSC-A

1. Working Principle

Heat pipe series solar collector is always connected with existing heating supply device. The selective coating inside tubes converts solar energy into heat energy and transfers heat to heat pipe via aluminum feed. The liquid (anti-freezing liquid) in the heat pipe changes into vapor which rises to the condensers. This transference of heat in the liquid creates a continuous circulation as long as the collector is heated by the sun.

2. Specification:

This model solar collector has a good advantage of multifunctional frame with different angels. It can adjust from up and down. It is one of the new type of headbox with fashionable design.It can be amounted on roof/flat foof/wall mounting in vertical position.

Headbox: 2.0mm aluminum alloy
Frame: 2.0mm aluminum alloy
Insulation: 50mm rock wool
Collector: with 14mm/20mm/24mm header heat pipe three target tubes
Manifold connection: 3/4'inch
Pressure bearing: 0.6MPa

Frame: 0-70 degrees

Lowest test temperature: -50 degrees

3. Technial and packing details :

Model	JNSC-15A	JNSC-18A	JNSC-20A	JNSC-24A	JNSC-30A
Construction	Heat pipe evacuated tube solar collector
Tube diameter(mm)	Outer tube: 58mm; Inner tube: 47mm
No. of collector pipes	15	18	20	24	30
Gross area(m2)	2.52	2.95	3.24	3.85	4.58
Aperture area	1.414	1.69	1.84	2.259	2.81
Absorber surface(m2)	1.303	1.56	1.73	2.08	2.6
L×W×H(mm)	2020×1268×136	2020×1493×136	2020×1643×136	2020×1960×136	2020×2380×136
Weight(Kg)	48	57.6	64	76.8	98
Fluid content(L)	1.1	1.3	1.44	1.6
Angle of inclination	0-70
Max. temperature °C	260^oC
Heat exchanger material	TU1
Max. operating pressure	12 Bar
Test pressure	6 Bar
Manifold connection diameter	3/4''

Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	Loading quantity
Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	20'GP	40'GP	40'HG
JNSC-58-1800-10A	0.87	2020× 88 ×136	0.185	154	311	368
JNSC-58-1800-12A	1.04	2020×103 ×136	0.2	143	288	340
JNSC-58-1800-15A	1.30	2020×1268×136	0.234	122	246	291
JNSC-58-1800-18A	1.56	2020×1493×136	0.27	106	213	252
JNSC-58-1800-20A	1.73	2020×1643×136	0.3	95	192	227
JNSC-58-1800-24A	2.08	2020×1960×136	0.34	84	169	200
JNSC-58-1800-30A	2.6	2020×2380×136	0.423	67	136	161

5. Service:

We can also offer brass fittings, copper pipes or stainless steel pipe and insulation pipe for connection.

OEM service is welcome.

We have a sound aftersale services. If there is any problems related to quality, we will replace it for you, anyhow this excluding force majour, or mankind causes.

When goods are sent by less than container, we will pack all vacuum tubes into wooden cases.

6. More details Shows: