Main Products: USB TTL Serial Cable ,USB RS232 cable ,USB rs485 cable ,Rpi ,USB high speed
FTDI USB DB-25 Male Serial RS-232 ST Adapter Cable Plastic for Windows MAC Linux
USD $8 - $15 /Piece
Min.Order:100 Pieces
Quick Details View All >
Shenzhen Union Electronics Co., Ltd.
Business Type: Manufacturer,Trading Company
Shenzhen Guangdong ChinaMain Products: USB TTL Serial Cable ,USB RS232 cable ,USB rs485 cable ,Rpi ,USB high speedProduct Details
USB -RS232 Data Cable
One cable does the whole job. No need to buy a RS232 USB to Serial Port adapter and another cable to connect to your CNC control port.
If you are looking for a USB to Parallel DB-25 or Printer cable this will NOT work. This is NOT a Printer Cable even though it looks like what you need.
This is a 1.8M Straight-through USB to Serial cable RS-232 with a DB-25 Male connector, plastic housing with thumbs screws. Typically you would use this cable to directly connect to another cable with a mating DB-25 Female connector. See my section entitled Is this the right cable for me? at the bottom of this listing
Features
o FTDI FT232RL and RS-232 level shifter chips
o Cable pin-out specification notation [Computer Side Signal Name (Output Pin #) ]: TXD (2), RXD (3), RTS (4), CTS (5), GND (7)
o USB 2.0 Full Speed compatible
This is a 1.8M Serial Null Modem USB to RS-232 with a DB-25 Male connector, Metal Housing with thumbs screws. This cable will work for a single computer to a CNC using XON/XOFF software handshaking. I also sell a similar cable that supports hardware handshake.
Here is a list of the controls that are compatible with this cable.
What is FTDI?
All USB adapter cables have a one or more computer chip used to convert USB ports into RS-232 ports. My listing pictures show you the chip(s) inside the USB connector housing. Of course your cable comes with the chip enclosed in plastic housing. Most USB adapter cables sold today use a chip made by Prolific or even worse fake versions of the Prolific chip. There are serious driver OS compatibility issues with Prolific drivers that are a nightmare for users. You get what you pay for. If you see a USB adapter cable that comes with a CD that cable uses the Prolific chip and it contains the Prolific drivers. My cables use only the FTDI chip which is more expensive but there are no driver issues and no fake chips to worry about. You don’t need a CD with my cable. Windows will install the FTDI drivers automatically. You don’t want a cable with a CD!!
Supported Operating System
Drivers are available which allow USB FTDI devices to work with the following operating systems:
Benefits with FTDI Cables
No CD required, no drivers to install typically
No Blue screen of death caused by Proflic drivers
No Proflic Error 10 - drivers cannot be installed problems
No fake Profilic chips
Contact me if you don’t see what you need
( Chipset: FT232RL+ ZT3222 )
| Item | Material |
| 1 | USB-RS232-WE-1800-BT-0.0 KABEL,USBARS232, SERIAL 1.8M 0V OUTPLEVE CN |
| 2 | 171-025-103L001 D-SUB, STECKER, LOETBAR, GRD, 25POL TW |
| 3 | 8655MH2501BKLF HAUBE, D, METALL, UNC 440, 25POLIG FR |
Brand Name: FTDI
Is this cable the right one for me?
First question you need to answer is do I need a Parallel or Serial cable. Parallel cables are mainly used on printers and plotters. I don't sell Parallel cables. Serial cables are the most common and these are ones I sell.
If you already have a cable that works between your old computer with a RS-232 DB-25 Female or DB-9 Male Serial ports and now you want to move to a computer that doesn’t have that RS-232 serial port then you need a Straight-Through (ST) cable. A ST cable turns any USB port into a RS-232 connector on your old computer. You can set the port number to COM1 or COM2 just like your old software expects if needed. Now you will use 2 cables to connect to that device, your old one and the USB to Serial ST cable.
If you want a single USB cable solution you need check the user manual for device you have to see what type of cable is required. If the manual doesn't state that you need a Straight-through or Null-Modem cable then a Cross-Over should be what you need. Ham Radios, TNCs, and modems need straight-through cable. Make sure you check with mating connector for the device you want to connect to and order the correct gender and number of pins. Contact me and I will help you order the correct cable and that will save us both time and money. I will need the Make and Model # of the device your trying to connect to your computer. If you don't see it ask me. I can provide USB cables with a wide variety of connectors.
Contact me if you don’t see what you need
Standard packaging size: 43.5*34*21cm
200pcs in one carton
Customised packing and length based on the quantity
What We Can Do:
1. All of our products have proceeded aging test before shipment and we guarantee to use
our products safety.
2. Support imprint your Logo on products and let your Logo shine anywhere.
3. OEM/OEM orders are warmly welcome!
Warranty and Return:
1. All products and accessoried have been tested by 3 times before ship out.
2. All products have 1 year warranty.If there is any man-made problem, we will replace or
repair for you freely.
3. We own the best after-sale service.If any problems happen, our team will do our best to
solve for customers.
Shenzhen Union Electronics Co.,Ltd is one of the leading suppliers who specialized in researching, designing and producing various kinds of Cables & Adapters.
If you have any question about our product, please don't hesitate to Contact US.
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln