Specifications

XJ1000 Workover Rig
1.Convenient for installation, operation and maintenance
2.2 engines
3.Reasonable layout

XJ1000 Workover Rig

Product Explanation:

1.XJ1000 workover rig, with 1800kN of max. static hook load, is a self-propelled workover equipment with double engine, mainly used for medium & deep well workover, oil testing, fishing and pump check operations.

2. It is equipped with a lifting system and a rotary operating system.

3. It is powerful, reliable and widely applied in many fields. It can be used for drilling operation for wells below 300m.

4.Reasonable layout, compact structure, easy transportation, convenient operation and maintenance.

Product Features:

1. 14×8 reinforced self-propelled chassis.
2. Unique compound box, high efficiency easy operation. Two engines can work together, or independently.
3. Eaton air-controlled water-cooled disc auxiliary brake.
4. 5 forward 5 reverse speeds rotary drives equipped with torque release device.
5. It can be used for both workover and shallow well drilling operations.

Main Parameters of workover rig

MODEL	XJ1000(150t)
Nominal service depth (ft)(27/8″EUE tubing)	————
Nominal workover depth (ft)(27/8″DP)	26000
Drilling depth (ft)(41/2″DP)	10000
Max. hook load (lbf)	400000
Rated hook load (lbf)	330000
Engine model	2×C15
Engine power (hp)	2×540
Hydraulic transmission box model	2×S5610HR
Transmission type	Hydraulic +
Effective height of mast (ft)	118,125
Traveling system	5×4, 6×5
Drilling line diameter (in)	1 1/8 ;1 1/4
Hook speed (ft/s)	0.66~4.3/0.66~3.93
Chassis model/Drive ways	XD70/14×8
Approaching/departure angle	26°/18°
Min. ground clearance (in)	12
Max. gradient ability (%)	26%
Min. turning diameter (ft)	135
Rotary table model	ZP205/ ZP275
Traveling block model	YG180
Swivel model	SL225
Overall moving dimension (ft)	74×10×15
Main unit mass (lb)	168000