Specifications
Rod Pump1. API11AX and ISO 9001 license
2. Long service life;
3. Competitive price;
4. Best service,good quality
Stationary Barrel Bottom Anchor Rod Pump-RHBC And RHBM
Features
It’s suitable for deep well since the barrel only bears pressure from outside and does not bear tensile load and its clearance change is small.
But it is not recommended for sandy wells since there is no calculation for the well fluid around the outside of the barrel so pump may become stuck in the tubing by packed sand.
Technical Specifications of Stationary Barrel Bottom Anchor Rod Pump :
Specification | Nominal Pump Bore(in) | Plunger Length(ft)
| Max.O.D.(mm) | Rod(in) | Tubing(in) | Pump Constant(m3/d) | Stroke (m) |
20-112RHBC | 1.12 | 4-6 | 46.7 | 3/4 | 2-3/8 | 0.92 | ≤7.5 |
20-112RHBM | 44.7 | ||||||
20-125RHBC | 1.25 | 47.5 | 3/4 | 2-3/8 | 1.14 | ||
20-125RHBM | 44.7 | ||||||
25-150RHBC | 1.50 | 59.5 | 3/4 | 2-7/8 | 1.64 | ||
25-150RHBM | 55.6 | ||||||
25-175RHBC | 1.75 | 59.5 | 3/4 | 2-7/8 | 2.24 | ||
25-175RHBM | 55.6 | ||||||
30-225RHBC | 2.25 | 72.1 | 3/4 | 3-1/2 | 3.69 | ||
30-225RHBM | 71.7 |
