PCTLR-621A Auto Density Control Double Pump Cementing Trailer
Negotiable /Set
Min.Order:1 Set
Sinotai Petroleum Equipment Co., Ltd.
PCTLR-621A Auto Density Control Double Pump Cementing Trailer
Product Explanation:The Model PCTLR-621A Auto Density Control Double Pump Cementing Trailer is a complete mixing and pumping unit. This unit is state-of-the-art in mixing and automatic control. The high energy mixing system can mix the most difficult slurries and the automatic density control will provide superior density control. The 7 bbl mixing and 20 bbl averaging tanks make the operator’s job easier, provides a cushion for fluctuations in bulk delivery, and provides excellent density and additive concentration averaging. The separate hydraulic power unit design makes the unit having sufficient horsepower to handle all kinds of jobs.
Product Features:
1.Continuous high energy mixing
2.Auto density control
3.Air inlet shutoff
4.Overpressure shutdown
5.SPS packing system
6.Non-radioactive densitometer
7.Stainless steel console
8.Engraved stainless steel panel
9.Two triplex pumps back to back installation
10.20 bbls averaging tank providing excellent density and additive concentration averaging
11.Remote monitoring and data record system available
12.Cold start aid, air starter, hydraulic starter on request
13.Integral high pressure iron
General Specification
Weight | 24.2 t (54,000 lbs) |
Overall Dimension | 36.9 ft (L) x 8.5 ft (W) x 13.5 ft (H) (mm) |
Max Pressure | 15,000 psi (w/3” fluid end) |
Max Rate | 26.4 bpm (w/2 4-1/2” fluid end) |
Density Range | 8.32-22.5 ppg ± 0.2 ppg |
Mixing Rate | 0 ~ 12.6 bpm |
Environment Temp. | -30ºC ~ 50ºC |
Humidity | < 90ºC |
Vibration | 1 g |
Working Time | >2 hours (under ); >3 hours (under max.flow) |
Technical Specification | |||||||
Trailer Chassis | King Pin | 2’’ (50) | Tire | 11.00-20 | |||
5th Wheel Plate Height Without Load | 54.7” | Support Legs | JOST | ||||
Axle | bpw14010 (2NO.S) | Wheel Base | 51.2” | ||||
Main Engine | Caterpillar C13 475hp@2100rpm (2sets) | ||||||
Aug. Engine | Caterpillar C7 300hp@2200rpm | ||||||
Transmission | Allision 4700 OFS | ||||||
Hyd. System | Closed loop for c-pumps, open loop for agitators | ||||||
Triplex Pump | |||||||
Mode No. | TPB600 | ||||||
Stroke | 6” (152.4mm) | ||||||
Brake Hp | 600 bhp (447kW) | ||||||
Gear Ratio | 4.6:1 | ||||||
Fluid End | 3” | 3 1/2” | 4” | 4 1/2” | |||
Working Pressure (psi) | 14,140 | 10,000 | 7,958 | 6,290 | |||
Max. Rate (gpm) | 251 | 335 | 441 | 562 | |||
ACM-III Mixing System | |||||||
Mixer | High energy, recirculating jet mixer | ||||||
Water Pump | MISSION 4X3 | ||||||
Rec/Trans Pump | SERVA RA56 | ||||||
Densitometer | Micro motion 3” non-radioactive densitometer | ||||||
Computer System | AB industrial computer | ||||||
Tank Volumes | |||||||
Mixing Tank | 7 bbl | Fuel tank | 238 gals | ||||
Averaging Tank | 20 bbl | Hydraulic tank | 2x45 gals | ||||
Disp. Tank | 2x10 bbl | Air tank | 20 gals |