Specifications

1.API standard
2.Auto Density Control
3.Air inlet shutoff.
4.Simplify operation
5.Safe and reliable

PCT-621ADouble Pump Cementing Truck

Product Explanation:The PCT-621A system is a truck mounted complete mixing and pumping unit. This unit is state-of-the-art in mixing and automatic control. The quality of design, component selection, and quality manufacture makes it a benchmark in the industry. The high energy mixing system can mix the most difficult slurries and the ACM automatic density control will provide superior density control. The pump unit can be utilized for a variety of pumping services including acidizing, cementing, pressure testing and fracturing within the limits of the available horsepower. Back-to back installation of the triplex pumps makes the truck shorter and more compact. This system is designed for the most demanding oil and gas well cementing requirements, and for minimum maintenance and operating in extremely harsh environment with temperatures ranging from -30°C to 50°C and relative humidity up to 90%.

Product Features:

1.Heavy-duty, desert type truck

2.Continuous High Energy Recirculating Mixing system

3.ACM Auto Density Control

4.Air Inlet Shutoff

5.Overpressure Protection

6.Close-loop hydraulic system

7.SPS Packing System

8.Non-Radioactive Densimeter

9.Stainless Steel Console

10.Engraved Stainless Panel

11.Liquid-filled and Dual Scale Gauges

12.Remote Monitoring and Data Record System available

13.Two Triplex Pump back to back installation

14.Cold start aid, air or hydraulic starter on request

15.Integral iron used in high pressure manifold.

General Specification

Weight	30 t
Dimension	11450 mm(L)x2600mm(W)x4200 mm(H)
Max.Pressure	14,100 PSI(100 MPa, 3” fluid end)
	10,400 PSI(70 MPa, 3 1/2” fluid end)
Max.Flow	3 m³/min(one 3” and one 4 1/2” Fluid End)
	3.4 m³/min(one 3 1/2” and one 4 1/2” Fluid End)
Density Range	1.0 ~ 2.6 g/cm³±0.024 g/cm³
Mixing Capacity	0 ~ 14.5 BPM (0-2.3 m³/min)
Working Temp.	-30ºC ~ 50ºC
Working Time	>2 hours (under ); >3 hours (under max.flow)

 

Technical Specification
Truck Chassis	Volvo FM440 6X6, left drive
Chassis Engine	D13 or higher
Chassis Transmission	VT2514B or higher, 14 forword+ 2 reverse gear
Deck Engine	Caterpilla C13 475 HP@2100 RPM (2 sets)
Deck Transmission	Allision 4700OFS (2sets, 5 forword+ neutral gear)
Hydraulic System	Chassis and deck transmission PTO driven, closed loop for cpumps,
open loop for agitators
Triplex Pump
Model No.	TPB600
Stroke	6” (152.4mm)
Max Brake HP	600BHP (447Kw)
Gear Ratio	4.6:1
Fluid End	3”	3 1/2”		4”		4 1/2”
Working Pressure(psi)	14.140	10,000		7,958		6,290
Max. rate (gpm)	251	335		441		562
ACM-III Mixing System
	Mixer
High energy, recirculating jet mixer	Mixing Water Pump
MISSION 4X3	Rec/Trans Pump
SERVA RA56	Densitometer
Micro Motion 3” non-radioactive densitometer	Computer System
AB industrial computer
Tank Volumes
Mixing Tank	7 bbl		Fuel Tank		82+142 gal
Averaging Tank	20 bbl		Hydraulic Tank		90 gal
Displacement Tank	2X10 bbl		Air Tank		20 gal

OPTIONS:

Deck Engine: Detroit S60 engine, 475HP@2100 RPM

Blower system and 1CM surge tank available.

ACM-IV,ACM-V density control system available.