Hydraulic Internal Cutter Type AND-S340T
Negotiable /Piece
Min.Order:1 Piece
Sinotai Petroleum Equipment Co., Ltd.
Hydraulic Internal Cutter Type AND-S
The hydraulic internal cutter type AND-S is a cutting tool actuated by pump
pressure. It’s specially used for cutting single and multiple strings of pipe
from inner to outside. Generally it can cut off the pipe at about 100 meters
above the cement surface or at about 1 to 4 meters below the mud surface.
Then load down the LM (Releasable slip spear) or AZ (Releasable casing
spear) to withdraw the cut casings.
Specification Series and Performance Parameters
Type | O.D mm(in) | Water hole mm(in) | Joint Connection API | O.D. of Casing | |
Min(in) | Max (in) | ||||
AND-S140 | 111(4 3/8) | 38(1 1/2) | 2 7/8 REG | 5 1/2 | 9 5/8 |
AND-S178 | 146(5 3/4) | 38(1 1/2) | 3 1/2 REG | 7 | 16 |
AND-S245 | 211(8 3/10) | 71(2 4/5) | 6 5/8 REG | 9 5/8 | 30 |
AND-S273 | 238(9 3/8) | 71(2 4/5) | 6 5/8 REG | 10 3/4 | 36 |
AND-S340 | 296(11 3/5) | 89(3 1/2) | 6 5/8 REG | 13 3/8 | 60 |
AND-S340T | 305(12) | 89(3 1/2) | 6 5/8 REG | 13 3/8 | 60 |
AND-S406 | 368(14 1/2) | 89(3 1/2) | 6 5/8 REG | 13 3/8 | 60 |