API Drilling Spool FS18-105
Negotiable /Set
Min.Order:1 Set
Sinotai Petroleum Equipment Co., Ltd.
API Drilling Spool FS18-105
Feature
1.The spool is made of alloy steel and heat-treated. It is used on the oil and gas well which is with a pressure of less than 105Mpa.It is tested according to <SY/T5053.1-2000 BOP and control equipment, BOP>before shipping to be used safely.
2.The spool applies to drilling high pressure oil and gas well, the connecting of the by passage of the spool with the valves and pipes will play not only a role of blowout and choking , but also a role of connecting the BOP with the wellhead.
Installation and Maintenance
1. Being used when connecting with the BOP and the casing head.
2. The steel ring grove should be cleaned before installation.
3. Tighten studs averagely of connecting the spool with the BOP.
Main Parameter (Ref.):
Type | FS18-105 |
Nominal Diameter(mm) | 180 |
Work Pressure (Mpa) | 105 |
Intensive Pressure (Mpa) | 105 |
By-pass Diameter(mm) | Φ103 or Φ78 |
Top and Bottom Connection Flange | API 6BX 18-105 BX156 |
Side Connection Flange | API 6BX 103-105 ×155 (Φ103) |
API 6BX 78-105 ×154 (Φ78) | |
Applicable Temperature (°C) | --29--+121 |
Actuating Medium | Oil with H2S, Natural Gas, Drilling Liquid, and Free Water |
Outside Dimension (L ×W ×H) | 880×505×700 |
Weight(kg) | 900 |