Kill manifold

1. Application

In case of increase in well head pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow down lines connected to the kill manifold, the increasing well head pressure also can be released directly or bottom hole pressure release, or water and

extinguishing agent can be injected into the well by means of the kill manifold. The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore through

themselves, but do not allow any backflow so as to perform the kill operation or other operations.

2. Structure

The kill manifold consists of check valves, gate vales, pressure gauges and pipelines. The one end of the kill manifold is connected to the drilling spool and the other end is connected to the pump. The kill manifold and choke manifold are both designed to API 16C and can be used together. The kill manifold is available from 14MPa, 21MPa, 35MPa and 70MPa pressure ratings.

3.Operating Requirements
(1) Working pressure of all pipelines, gate valves and check valves shall be compatible with that of the BOP stack used.
(2) The kill manifold is not intended to be used as common lines for pouring drilling fluid.

*One year quality assurance 

* Training: operation manual, overseas installation is also available;

* Spare parts are available in our factory at cost price for former customers;

* 24 hour on-line guidance for operation and maintenance.

Packaging: standard export package or as consumer’s request

Shipping: air transportation, water way transportation, railway transportation, road  transportation

Anne Zhao
Sales representative

Sinotai Petroleum Equipment Co.,Ltd
Address: Dongying Economic Development Zone, Dongying City, Shandong Province, China

Mob:86 18554601089
Tel:86 546 8300512
Fax:86 546 8308512 
Skype:anne_sinotai 
Web: