Product Details

Specifications

sale China Rubber Lifting Belt in machinary
High Quality
Makes less friction coefficient
Suitable for running on a machin

sale China Rubber Lifting Belt in machinary

Rubber lifting belt is multi-layer silica gel fabric folded with cover rubber outside the belt core. It can be classified in heat-resistant lifting belt and common lifting belt as per application temperature while can be classified in full-cotton, Dacron and cotton, nylon and EP lifting belt as per core material.
1.Physical properties and level of cover rubber.
It can be divided as type D for heavy-wear, type L for middle-wear and type T for high-temperature material conveyance as per wear and load of material.
2.Wide specification of lifting belt: 150 200 250 300 350 400 500 600mm etc.
3.Technical requirement of lifting belt.

1. Physical property of cover rubber is as below:

Item		Index
		Type D	Type L
Tensile strength Mpa≥		18.0	15.0
Tensile yield %≥		400	350
Hot-air aging	Tensile strength variation%	-25-25
70°Cx7d	Tensile yield variation%
Abrasion value cm³		0.7	0.8

Remarks:Physical property of cover rubber will depend on if lift special material or acute wear material.
1.Cover rubber property of heat-resistant belt (T type) should accord with HG/T2297 (heat-resistant belt) standard.
2.Longitudinal tensile strength of belt should not lower than nominal value below: 100/ 125 /160/ 200 /250/ 315/ 400 /500N/mm .
3.Tensile yield of belt longitudinal thickness should not lower than 10% and reference elongation should not more than 4%.
4.Bond strength between layers of lifting belt with fabric core is listed as below: N/mm.

Fabric class and item		Between layers	Between cover and cloth layer
Fabric class and item		Between layers	Thickness of cover	Thickness of cover
100% Nylon fabric	Average of longitudinal test≥	5.25	3.15	4.50
100% Nylon fabric	Minimum of longitudinal test≥	3.85	2.40	2.85
100% other synthetic fabrics	Average of longitudinal test≥	4.50	3.15	3.50
100% other synthetic fabrics	Minimum of longitudinal test≥	3.85	2.40	2.85
Cotton canvas	Average of longitudinal test≥	3.00	2.20	2.60
Cotton canvas	Minimum of longitudinal test≥	1.95	1.60	1.95
Other natural fabric	Average of longitudinal test≥	3.15	2.35	2.80
Other natural fabric	Minimum of longitudinal test≥	2.70	1.60	2.20

Remarks:Bond strength between layers of heat-resistant conveyer belt with fabric core should accord with HG/T2297 standard.