Rubber Conveyor Belt

Width: Up to 2400 mm.

Length: Open or endless up to 400 meters in single length provided the diameter does not exceed 10 feet. 

Plies: 1 plies to 8 plies.

Type of Fabrics & their features: 

Nylon/Nylon (NN) Carcass: NN 100, NN 125, NN 150, NN 200, NN 250, NN 300, NN 350, NN 400 and NN 450.
¤ Lower longitudinal elongation
¤ Higher tensile strength
¤ Good flexibility and trough ability
¤ Good resistance to mildew, moisture and rotting
¤ Good resistance to edge wear
¤ Excellent impact resistance
¤ Unaffected by alkalis and weak acids
¤ Suitable for conveying material over long distances

Polyestor/Nylon (EP) Carcass: 100, EP 125, EP 150, EP 200, EP 250, EP 300, EP 350, EP 400 and EP 450 
¤ Besides having the advantages as listed for NN carcass belts, EP belts have the additional advantage of lower longitudinal elongation.

Cotton/ Cotton (CC) Carcass: 28 OZ, 32 OZ, 36 OZ, 42 OZ, 48 OZ and 34 OZ.
¤ Suitable for most applications
¤ Good bonding for rubber
¤ Good fastener holding properties

Cotton/ Nylon (CN) Carcass:
¤ Good troughability
¤ Resistance to longitudinal tearing and damage due to edge turn up
¤ Improved resistance to impact damage
¤ Lighter in weight
¤ Better mechanical fastener holding properties

GRADES:
GRADE M-24: Compounded from premium quality natural rubber to provide excellent resistance to cutting gouging, wear & tear and confirms to the maximum abrasion loss value & minimum tensile strength. 

GRADE N-17: Recommended for medium duty services to handle sized materials like woodchips, lime, fine stones, gravel's etc. 

GRADE HR(T1): Manufactured with specially formulated rubber compound for handling materials like ash, hot lime, foundry sand etc. having temperature up to 125°C for coarse and 100°C for fines. 

GRADE SHR(T2): This cover grade is specially formulated with synthetic & natural rubber to provide superior heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material. 

GRADE UHR: Specially made with formulation of S.B.R rubber for providing ultra heat & abrasion resistance. Recommended for temperature up to 180°C for coarse and 160°C for fines material. 

GRADE FR: This belt is widely used in coal & such type of mines where the ambient temperature may not be high but there is distinct hazard of belts being enveloped in fire. 

GRADE OR: specially compounded synthetic rubber cover grade is specially designed to give the best possible resistance to mineral, vegetable and animal oils.


Type of Edges: Available in cut edges and moulded (protected) edges.

Skim Coated: The belts are processed with all its fabric plies skim coated with superior quality rubber compounds

Mildew Inhibition: The rubber compounds used in the belts are designed such as to have full protection against mildew

Breaker Ply: To with stand extra impact during service the belts are provided with breaker ply on demand.

Belt Designation: Available in three types i.e. General Duty (GD), Heavy Duty (HD) and Extra Heavy Duty (EHD).

National and International Standards followed:
¤ Bureau of Indian Standards (BIS)
¤ British Standards (BS)
¤ International Organization for Standardization (ISO)
¤ German Standards (DIN)
¤ Canadian Standards (CAN / CSA)
¤ Australian Standards (ASS)
¤ France Standards (NF-T47-100/101)

Note: The above chart indicates our standard range of Nylon / EP Conveyor Belts. Other constructions can be designed and manufactured by us against specific requirements. Data provided in this catalogues is indicative only and specifications may be changed by the Company due to continuous and ongoing developments in our products.