EP200 1000MM Width 4p Polyester Conveyor Belting
USD $3 - $30 /Meter
Min.Order:100 Meters
Lixian Huadu Rubber Belts Co., Ltd.
Polyester conveyor belts,also called EP conveyor belts,whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft.
The belts have the characteristics of low elongation in warp and good troughability in weft,good water resistance,good wet strength,no mould,suitable for medium,long-distance and heavy-load transportation of materials.Because of the high initial modulus of polyester,the belts can choose a relative low safety factor.
Fabric type | Fabric | Ply thickness (mm/P) | (N/mm) single fabric strength | Cover thickness (mm) | Width | Length | |
specs | Upper | Lower | mm | m | |||
Polyester | EP-100 | 0.8 | 100 | 2.0~8 | 0~4.5 | 400-2000 | 20-300 |
(EP) | EP-125 | 0.85 | 125 | ||||
EP-150 | 0.9 | 150 | |||||
EP-160 | 0.9 | 160 | |||||
EP-200 | 1.05 | 200 | |||||
EP-250 | 1.25 | 250 | |||||
EP-300 | 1.35 | 300 | |||||
EP-350 | 1.5 | 350 | |||||
EP-400 | 1.8 | 400 | |||||
EP-500 | 2 | 500 |
Adhesion and elongation of the belt: | |||||||||||
Belt | Adhesive strdngth | Elongation | |||||||||
carcass | Between plies | N/mm Between rubber and carcass | Longitudinal elongation at break | Longitudinal elongation at reference load | |||||||
N/mm | Rubber thickness | Rubber thickness | %>= | %<= | |||||||
<=1.5mm | >1.5mm | ||||||||||
EPcanvas | >=4.50 | >=3.2 | >=3.5 | 10 | 4 | ||||||
Cover properties of the belts: | |||||||||||
Cover grade | Tensile strength | Elongation | Abrasion | Change Rate of tensile strength and elongation after aging | |||||||
>= | >= | <= | |||||||||
Mpa | kgf/cm2 | % | mm3 | % | |||||||
Heavy(H) | 24 | 240 | 450 | 120 | -25~+25 | ||||||
Medium(M) | 18 | 180 | 400 | 100 | -25~+25 | ||||||
Light(L) | 15 | 150 | 350 | 200 | -30~+30 |