Specifications

wave shape raised edge conveyor belt
1.high bonding degree
2.splendid flexibility
3.bottom cover rubber:1.5-4.5mm

Wave shape raised edge conveyer belt 

 

 

1Adhesive Strength:100-600N/mm
2CC NN EE PP EP Fabric
3Cover Rubber:9-25mpa

Characteristics

1.Good elasticity, anti-impact;

2.High adhesion, good flexibility and trough ability;

3.Better stability of size and heat-resistance

4.Good water-proof ability, little change in strength under dry or wet conditions.

The ordinary conveyor belt to carry out the GB code GB/T7984-2001 standard.

 

Wave woven conveyer belt always work together with the wave-shape Apron transfardng system, normally the angle is more than 30^o, it also could work together with the common use belt conveyor for [he horizontal and short distance transportation (No clapboard generally).

 

 

Wave woven conveyer belt uses the baseband, flange and diaphragm (it is not necessary in the horizontal transpodation) that the trough degree no greater than 0.03, and after twice suguration it could be made.

 

 

Wave woven conveyer belt using the technics of twice sulfuration compared to the similar products using the gluing process, has the advantages of high bonding degree and splendid flexibility, it could avoid the phenomenon of flange, clapboard cracking and fall off etc

 

 

 

 

 

 

The parameter relationship of the base belt width and flange height is as the following table(mm): Bandwidth B of base Block high H Horizontal baffle high H1 The wave bottom wide B1 Effective bandwidth B2 Empty wide B3 Horizontal baffle form 300 40 35 25 180 35 TC 60 55 50 120 40 80 75 400 60 55 50 180 60 TC 80 75 100 90 500 80 75 50 250 75 TC 100 90 120 110 650 100 90 50 350 100 TC 120 110 160 140 75 300 800 120 110 50 460 120 TC 160 140 75 410 200 180 1000 160 140 75 550 150 TC 200 180 240 220 1200 160 140 75 690 180 TC 200 180 240 220 300 260 100 640 1400 200 180 75 830 210 TC 240 220 300 260 100 780 400 360