install       

How important is a good stone installation?

As with any building material, the beauty of that product is greatly enhanced by how well it is installed. With Manuka Stone^®, careful consideration regarding the type of profile and color selected, the actual installed stone “pattern”, and the type of grout technique used, are all very important factors to regard. It is always best to create a mock up board with the desired aesthetic appeal prior to installation on your project

Where can I install Manuka Stone^®?

Manuka Stone can be applied to any structurally sound surface with the proper preparation. It fits nearly any building plan — large or small, interior or exterior, new residential or commercial projects - or on any remodel.

Can I install Manuka stone^® myself?

 In general, installation of Manuka Stone^® can be installed by almost anyone. However, installation does require a fundamental understanding of stone masonry.

 Can I install Manuka Stone ^®near water?

 It is not recommended for use below the water line in a pool, a fountain or below grade. Due to the large amount of water or moisture in the area, our product will be at risk for deterioration or discoloration. We would recommend using a natural stone in these types of applications.

Can we install Manuka Stone ^®around a fireplace?

Manuka Stone can be installed around a fireplace. The veneer has to be a minimum of 18" from any open flame.

What measures should be taken for hot /cold weather installations?

 For cold weather installations ambient temperature should be 40ºF or higher at the time Manuka Stone^® veneer is applied. If the temperature is below 40ºF, mortar should be heated between 40ºF – 120ºF (not to exceed 140ºF). Any mortar that freezes should be discarded. Wall surfaces may need to be covered and heated after installation of veneer to avoid freezing the mortar. Mortar should be kept under 120ºF and be used within 2 hours of initial mixing.

Technical of Manuka stone^®:

 Is Manuka Stone^® combustible?

No. Manuka Stone’s listing by test shows zero fuel contributed and zero smoke developed. It can be installed as a facade to fireplaces and behind stoves. It is recommended the product is at least 18" away from any direct flame to prevent discoloration of the stone

How does Manuka Stone^® withstand freeze / thaw cycles?

Manuka Stone^® products are tested for freeze/thaw durability. As with any installation, making sure to incorporate good building practices that include proper flashing and water diversion techniques will help ensure a successful installation.

Will Manuka Stone ^®fade?

The base color is blended throughout and permanent mineral oxide pigments are applied and absorbed when the veneer is cast. Color becomes an integral part of the veneer and, similar to natural stone, there are minimal noticeable color changes after years of weathering.