TEE300 Mud Pump
Structural Characters
-Direct input at the end of the crankshaft
-The shell is made of integral nodular cast iron
-The crankshaft is made of cast alloy steel
-The outboard oil pump is used to lubricate all rotary parts by force and all accessories of the
oil pipe are fastened outside the shell so that it is easy to maintain.
-The hydraulic cylinder is made of alloy steel
-The intermediate rod is connected to the piston rod by clamps
-At the corners of crankshaft,bearing bush is used to take the place of bearings
Specification
Rated Input Power | 121 kW (165 HP) |
Max.Stroke Per Minute | 300 |
Stroke Length | 5” |
Max. Working Pressure | 10000 psi |
Suction Inlet Flange | 6” 150 lb flange |
Discharge Outlet Flange | 2 9/16’’ 10000 psi flange |
Approx Weight | Less Skid 3870 lb |
Performance Table of TEE300 Triplex Single Acting Pump
Pis | Displacement | Discharge Capacity and Pressure | ||||||||||||
75SPM | 125SPM | 175SPM | ||||||||||||
in | Gal/rev | Liter/rev | GPM | LPM | PSI | MPa | GPM | LPM | PSI | MPa | GPM | LPM | PSI | MPa |
4 | 0.817 | 3.091 | 82 | 309 | 2950 | 20.6 | 163 | 618 | 1475 | 10.4 | 245 | 927 | 975 | 6.9 |
3.5 | 0.623 | 2.359 | 62 | 236 | 3800 | 26.8 | 125 | 472 | 1925 | 13.5 | 187 | 708 | 1300 | 9 |
3 | 0.460 | 1.741 | 46 | 174 | 5250 | 36.8 | 92 | 348 | 2625 | 18.4 | 138 | 522 | 1750 | 12.3 |
2.75 | 0.387 | 1.463 | 39 | 146 | 6150 | 43.3 | 77 | 293 | 3125 | 22 | 116 | 439 | 2075 | 14.6 |
2.5 | 0.319 | 1.206 | 32 | 121 | 7550 | 53.2 | 64 | 241 | 3775 | 26.5 | 96 | 362 | 2525 | 17.7 |
2.25 | 0.258 | 0.977 | 26 | 98 | 9300 | 65.5 | 52 | 195 | 4650 | 32.8 | 77 | 293 | 3100 | 21.8 |
2 | 0.204 | 0.722 | 20 | 77 | 10000 | 70 | 41 | 154 | 5900 | 41.4 | 61 | 232 | 3925 | 27.6 |
1.75 | 0.156 | 0.591 | 16 | 59 | 10000 | 70 | 31 | 118 | 7700 | 54.2 | 47 | 177 | 5125 | 36 |
Performance data are calculated by 90% mechanical efficiency and 100% volumetric efficiency |