Abrasion Resistant Steel
USD $450 - $550 /Metric Ton
Min.Order:50 Metric Tons
Wuhan Genprior Enterprise Co., Ltd.
Abrasion Resistant Steel
Product Description:
Wear resistant steel is also bimetal compound wear-
resisting steel plate. It is special used for working conditions under large area abrasion. It is made by reinforcing alloy wear layer with suitable thickness, high hardness, good wear property on the surface of the general low-carbon steel or low-alloy steel which has good toughness and plastic property through hardfacing method.
Application:
Wear resistant(abrasion resistant)steel is widely used in the bad working conditions, demanded of high strength, high-wear-resisting performance in engineering, mining, construction, agriculture, port and metallurgical machinery products.
Product Details
1. Available Size
Thickness(mm) | Width(mm) | Length(mm) |
5-60 | 1200-3000 | 1500-10000 |
2. Chemical Composition
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | B |
NM360 | ≤0.17 | ≤0.50 | ≤1.50 | ≤0.025 | ≤0.015 | ≤0.70 | ≤0.50 | ≤0.40 | ≤0.005 |
NM400 | ≤0.24 | ≤0.50 | ≤1.60 | ≤0.025 | ≤0.015 | 0.40-0.80 | 0.20-0.50 | 0.20-0.50 | ≤0.005 |
NM450 | ≤0.26 | ≤0.50 | ≤1.60 | ≤0.025 | ≤0.015 | ≤1.50 | ≤1.00 | ≤0.50 | ≤0.004 |
NM500 | ≤0.38 | ≤0.50 | ≤1.70 | ≤0.020 | ≤0.010 | ≤1.20 | ≤1.00 | ≤0.65 | 0.005-0.006 |
Hardox400 | ≤0.22 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.015 | ≤0.80 | ≤0.50 | ≤0.25 | ≤0.004 |
Hardox450 | ≤0.25 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.010 | ≤0.50 | ≤0.25 | ≤0.25 | ≤0.004 |
Hardox500 | ≤0.29 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.015 | ≤1.00 | ≤1.00 | ≤ 0.60 | ≤0.004 |
3. Steel Grade and Standard
NM360/NM400/NM450/NM500; NR360/NR400; B-hard360/B-hard400/B-hard450/B-hard500;
Hardox400/Hardox450/Hardox500
According to AISI, ASTM, BS, DIN, GB, JIS
Products Show:
Related Products:
Carbon structural steel
High strength structural steel
Ship building steel plate
Pressure vessel plate/boiler steel plate
Weathering steel/Corten steel
Get in Touch
For more details, please just fill in the message below and click the button"Send".