Wear resistant steel for construction, wear resisting steel plate
USD $500 - $2,000 /Metric Ton
Min.Order:1 Metric Ton
Wuhan Genprior Enterprise Co., Ltd.
Wear resistant steel for construction, wear resisting steel plate
Wear resistant steel is also bimetal compound wear-resisting steel plate. It is special used for working conditions under large area abrasion. It is made by reinforcing alloy wear layer with suitable thickness, high hardness, good wear property on the surface of the general low-carbon steel or low-alloy steel which has good toughness and plastic property through hardfacing method.
Wear resistant(abrasion resistant)steel is widely used in the bad working conditions, demanded of high strength, high-wear-resisting performance in engineering, mining, construction, agriculture, port and metallurgical machinery products.
1. Available Size
Thickness(mm) | Width(mm) | Length(mm) |
5-60 | 1200-3000 | 1500-10000 |
2. Chemical Composition
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | B |
NM360 | ≤0.17 | ≤0.50 | ≤1.50 | ≤0.025 | ≤0.015 | ≤0.70 | ≤0.50 | ≤0.40 | ≤0.005 |
NM400 | ≤0.24 | ≤0.50 | ≤1.60 | ≤0.025 | ≤0.015 | 0.40-0.80 | 0.20-0.50 | 0.20-0.50 | ≤0.005 |
NM450 | ≤0.26 | ≤0.50 | ≤1.60 | ≤0.025 | ≤0.015 | ≤1.50 | ≤1.00 | ≤0.50 | ≤0.004 |
NM500 | ≤0.38 | ≤0.50 | ≤1.70 | ≤0.020 | ≤0.010 | ≤1.20 | ≤1.00 | ≤0.65 | 0.005-0.006 |
Hardox400 | ≤0.22 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.015 | ≤0.80 | ≤0.50 | ≤0.25 | ≤0.004 |
Hardox450 | ≤0.25 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.010 | ≤0.50 | ≤0.25 | ≤0.25 | ≤0.004 |
Hardox500 | ≤0.29 | ≤0.70 | ≤1.60 | ≤0.025 | ≤0.015 | ≤1.00 | ≤1.00 | ≤ 0.60 | ≤0.004 |
3. Steel Grade and Standard
NM360/NM400/NM450/NM500; NR360/NR400; B-hard360/B-hard400/B-hard450/B-hard500;
Hardox400/Hardox450/Hardox500
According to AISI, ASTM, BS, DIN, GB, JIS
For more details, please just fill in the message below and click the button"Send"