Downhole Drill Motor
USD $12,300 - $23,076 /Piece
Min.Order:2 Pieces
Sinotai Petroleum Equipment Co., Ltd.
Helicoid Hydraulic Motor is composed of bypass valve, hydraulic motor, cardan shaft and transmission shaft.
The screw drill tool is a kind of power tool that transforms the pressure of liquid to mechanical energy in the downhole. When the power liquid flows into the screw motor, a pressure difference will be produced between the inlet and outlet of the motor, then the differential pressure drives the rotor rotating round the stator, provide torque moment and speed to the drill bit, thus the drilling process is being performed. The drill pipe is not rotating during work process, so the advantages are obvious if comparing with conventional drilling system. The downhole screw motor is suitable for vertical, directional and horizontal drilling.
The Main Technical Specification of LZ Screw Drill Tool | |||||||||||
Model | O.D. Mm(in) | Hole Size mm(in) | Joint Thread API | Nominate Flowing L/s | Bit Rotate Speed r/m | Hole Pressre Drop MPa | Motor Pressure Drop MPa | Working Torque N/m | Max. Torque kN/m2 | Nominate Weight on Bit kN | Max. Weight on Bit kN |
5LZ95×7 | 95(33/4) | 118-152 (45/8-6) | 27/8REG | 7-16 | 80-200 | 7.0 | 2.4 | 780-1150 | 1710 | 25 | 50 |
5LZ102×7 | 102(4) | 118-152 (45/8-6) | 27/8REG | 7-16 | 80-200 | 7.0 | 2.4 | 780-1150 | 1710 | 25 | 50 |
5LZ120×7 | 120(43/4) | 149-200 (57/8-77/8) | 31/2REG | 10-16 | 80-160 | 7.0 | 3.2 | 1215-1817 | 2560 | 68 | 80 |
5LZ127×7 | 127(5) | 149-200 (57/8-77/8) | 31/2REG | 10-16 | 80-160 | 7.0 | 3.2 | 1215-1817 | 2560 | 68 | 80 |
5LZ165×7 | 165(61/2) | 213-251 (83/8-97/8) | NC50 up 4 1/2REG down | 19-32 | 80-160 | 7.0 | 3.2 | 2916-3996 | 6800 | 80 | 160 |
5LZ172×7 | 172(63/4) | 216-251 (81/2-97/8) | NC50 up 4 1/2REGdown | 19-32 | 80-160 | 7.0 | 3.2 | 2916-3996 | 6800 | 80 | 160 |
7LZ197×7 | 197(73/4) | 251-311 (97/8-121/4) | 5 1/2REG up 6 5/8REG down | 32-50 | 80-150 | 7.0 | 4.0 | 6515-9215 | 13000 | 160 | 270 |