Specifications
API 16C & NACE MR0175 kill ManifoldsUsed for injecting water or for injecting extinguishing agent
Carry out pressure control
API 16C & NACE MR0175 kill Manifolds
Kill Manifold are key equipment to carry out the pressure control in the oil/gas well
It's used for pumping heavy drilling fluids into the well for bottom hole pressure balance,and for releasingbottom hole pressure
It's also used for injecting water to wash well or for injecting extinguishing agent.
The choke manifolds supplied by our company conform to API Spec 16C and NACE Standard MR0175.
We can design and make this product according to users' requests.
Main Parameters:
Model | YG-21 | YG-35 | YG-70 | YG-105 |
working pressure psi(MPa) | 3000(21) | 5000(35) | 10000(70) | 15000(105) |
nominal size | 2-1/16in.~4-1/16in. | 2-1/16in.~4-1/16in. | 2-1/16in.~4-1/16in. | 2-1/16in.~4-1/16in. |
working temperature | -29~121°C | -29~121°C | -29~121°C | -29~121°C |
specification level | not less than PSL3 | not less than PSL3 | not less than PSL3 | not less than PSL3 |
material class | EE~FF | EE~FF | EE~FF | EE~FF |
working medium | mud, oil, natural gas | mud, oil, natural gas | mud, oil, natural gas | mud, oil, natural gas |