Specifications

Applied in testing the bursting strength and bursting distension of fabric, non-woven, and leather.

Pneumatic type auto clamping Fabric and Leather burst pressure testing machine

 

Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time(elastic diaphragm method).

 

Standards GB/T7742, FZ/T60019, ISO2960, ASTM D3786

 

Instrument characteristics 1.Meeting the testing area of 50cm²(Φ79.8mm) 2. Sample clamp support system 3.Supporting on-line communication

 

Technical parameters

1.Testing range:  0-10Mpa (B type)

2.The min. value: 0.002Mpa

3.Test area:  7.3cm²(Φ30.5mm) (B type)

4.Elastic mold-plate size: ≤2mm

5.The max. burst length: 70±0.02mm

6.The max. burst time: 99.9±0.1S

7.Pressuring speed:100 -500cm2/min

8.Output types :Printing output, displaying output,

 

             supporting on-line communication

9.Power source:AC220V 50Hz 800W

10.External dimension:620×400×530mm

11.Weight:300kg

 

 

Auto Pneumatic Bursting Strength Tester

Determination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation.

 

Standards ISO13938-2, ASTM D3786, IWS Tm29

 

Test principle:

Through the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion. Rate of increase has been constant pressure until the sample burst, measured burst strength and burst dilation.

 

Instrument features:
1,Computer control, automatic burst test, automatic calibration, automatic data processing, experimental form of a report output.
2,Air power, high cleanliness.
3,Color touch screen interface, the English menu operation, support online communication
4,Bursting pressure of up to 1500KPa (15Bar or 200psi)
5,Burst dilation can reach 70mm
6,Test surface enhanced lighting system
7,The main specimen clamping system of aerodynamic power
8,A variety of optional test area, and easy switching  

                      
Technical parameters:

 

1,Test range:0-1 .5 Mpa
2,Minimum scale value: 0.002 Mpa
3,Pressure mode: direct pressure two kinds of time pressure
4,Test Accuracy: ≤ ± 0.2% F · S
5,Flexible diaphragm thickness: ≤ 2mm
6,Test area: 50cm2 (φ79.8mm)
7,Pressure rate: nonlinear sub-pressure 0.1-0.5L/min
8,Safety cover: high transparent plexiglass
9,Power: AC220V/50Hz 800W
10,Dimensions: 560 × 450 × 580mm (host L × W × H)
11,Weight: 60kg

Optional test area:

 

Area(cm2)	100	50	10	7.3
Diameter(mm)	112.8	79.8	35.7	30.5