Product Details

size16mm smd 5050 LED pixel /point light DC 5v

From YiGao company, the China LED factory since 1995

Full color Smd 5050 LED pixel /point light with inlay IC WS2811/UCS1903 , you can design the program and show your attractive idea.

It can show different color at the same time, specially design for the signs and logo.

DC5V low voltage drive, low power consumption, and long working life 50000hours.

Specification:

This digital RGB Smd 5050 LED pixel /point light has 2 covers, one is frosted and another one is

transparent, Its the preferred Pixels for the demanding lighting designers.Each LED pixel has its own

3pin connectors and controlled by WS2811/UCS1903 IC.It can be perfectly work with DMX

controller,SPI (SD card controller).

1. International Protection Rating:IP65.

2.Ideal light sourxce is used in large-scale outdoor advertising pixel light and lighting engineering,not lonly high brightess,can make your signs colorful.

3.LED can be easily removed from the hole,and the installation and maintenance more convenient.

4.LED line length is 100 mm ±5%

Products Name	16mm LED Pixel Light
Model NO.	YX-D16
Power Consumption	0.3W/pcs
Work Voltage	DC5V
IC model	WS2811/UCS1903
LED Quantity	3leds SMD5050
Color	Full color(ICRGB)
Packing	20pcs/string
Waterproof Grade	IP66
Work Temperature	-20-60°C
Life-span	50,000H
Certificate	CE&RoHS
Warranty	3 years

Application rang:

1.Outside advertising led sign display board and signage.

2.Amusement lighting

3.DJ,Nigh club ,window display lights

4.LED screen,supermarket.hotel lighting

5.Any place needs color chaning.

Note:

1.Please make sure the power of the transformer bigger than the total power of your project.

2.Please take care of the positive and negative pole of the module when you connect it with the transformer.

3.Do not make the transformer full load.

4.Please make sure the IC and controller when you make the program.

How to install the size16mm smd 5050 LED pixel /point light DC 5v di on the led sign display board

1.Calculate the quantity of smd 5050 LED pixel /point light DC 5v you need and the space between two modules according to your led sign display board .

2.Fix the led pixel module light or LED pixel /point light on the led sign display board by screw.

CONNECTION:

1. Signal wire: DC+, DAT, GND (RED:DC12V,GREEN:DAT,YELLOW:GND)

2. DC+ and GND connect to power supplier;DAT and GND connect to controller

3. Relative Controller: SPI controller support UCS1903; when use DMX decorder, can connect to DMX system

4. Support offline control

Smd 5050 LED pixel /point light photo show

Smd 5050 LED pixel /point light application show

Smd 5050 LED pixel /point light product certification show

welcome to our factory, we are always waiting for you