Product Details

92mm explosion proof ventilation fan/ 3.6 inch explosion proof and waterproof fan

Waterproof axial dc motor 92mm, low noise and long life expectancy, are widely used in the computer information technology, network communications, as well as industrial production equipment, medical equipment, home appliances, etc.

Description:

Waterproof axial dc motor,Brushless DC Fan, Axial DC Fan, DC Motor Fan, Cheap Fan, Portable Fan, CPU Fan, Computer case fan, PWM Fan, FG cooling fan.
High speed , Middle speed, Low speed.
Plastic Frame or Die-Cast Aluminum Frame and Plastic impeller.
3 blades.
12V DC 24V DC or 48V DC.
Ball bearing or Sleeve bearing or Hydraulic bearing.
Terminal or Lead wire.
Waterproof explosion proof or high proof are can be satisfied.

Important Note:

Rated Current: Rated Current shall be measured after 3 minutes of continuos rotation at rated voltage.
Rated Speed: Rated Speed shall be measured after 3 minutes of continuos rotation at rated voltage
Start Voltage: The voltage which is able to start the fan to operate by suddenly switching “ON”
Dropping test standard: Drop a minimum packing box in a height of 30 cm for perpendicular free falling motion to the surface of wooden plate of 10 cm. After test, connect the fan to the power, the fan still in normal operation.

Specifications:

A: ELECTRICAL

Standard operating condition is 25℃, 65%RH ambient, unless otherwise specified.

	Item	Specification	Test Condition
1	Rated Voltage	12V ±10%	DC power supply
2	Rated Current	0.18Amp (Typical)±10%	DC power supply at Rated Voltage
4	Rated Power	2.16W	At Rated Voltage.
5	Starting Voltage	6V (Max.)	DC power supply
7	Speed	3350RPM ±10%	Measured at 5 minutes after starting under 25±5℃, 65±5%RH ambient
8	Acoustical Noise	34 dB	Measured at typical speed with an acoustic microphone 1 meter away from the fan intake in a test chamber with background noise level below 18dB(A)
9	Static Pressure	0.19 IN H2O	Refer to PERFORMANCE CHART ITEM 9 at zero airflow.
10	Air Flow	44.0CFM	Refer to PERFORMANCE CHART ITEM 9 at zero static Pressure.
11	Direction of rotation	Counter-anticlockwise	DC power supply, viewed from impeller.
12	Waterproof grade	IP55

B. MATERIAL

Impeller		PBT
Frame		PBT
Bobbin		PBT UL94-V0
Lead Wire	+:Red RD:Yellow –:Blue	24 UL 1007 AWG26 28

C.MECHANICAL

Dimensions	L * W * H =929232mm
Weight	130 grams
Standard operating temperature range	-40 ℃ ~ 70 ℃
Standard storage temperature	-40 ℃ ~ 70 ℃
Bearing system	Ball Bearing (NMB)

D.EXPECTED LIFE SPAN (MTBF)

At a standard operating condition of -40~10℃, 65%RH ambient

Ball Bearing:80000 hrs , Continuous operating under -40~10℃ 65 %RH ambient.

E. RELIABILITY

	Item	Specification	Test Condition
1	Locked Rotor Test	Flameproof and damage free	Rotor locked for 72 hrs with Rated Voltage
2	Reverse Voltage Test Protection	Yes	Reverse with Rated Voltage
3	Balance Test	No protruding beyond the circle within 10 seconds	The fan runs in a circle, scaled by fan radius plus 10mm
4	Drop Test	All specified characteristics remain unchanged	Drop D.U.T.(The standard packing) from the test machine at 76cm below. Individual one angle,
5	Vibration Test	All specified characteristics remain unchanged	Ambient temp.:-40~10 ºC with Rated Voltage Amplitude:0.4-2.5 mm Acceleration:14.7 S/m² Frequency:10HZ-60HZ Sweeping period:1 min 10HZ-60HZ:30 seconds 60HZ-10HZ:30 seconds Total:10 cycles
6	High/Low Temperature Cycling	All specified characteristics remain unchanged	20 minutes slew rate +10ºC (1 hr) ,–40 ºC (1 hr) Total:36 cycles with Rated Voltage
7	Low Temp. Storage	All specified characteristics remain unchanged	Tested under standard condition ;after 500hrs, -40 ºC storage, without power supply.
8	High Temp. Storage	All specified characteristics remain unchanged	Tested under standard condition ;after 500hrs, 80 ºC storage, without power supply.
9	Dielectric Strength	Max 1mA of leakage Current	Input 500V(AC) for 1 sec between lead (+/-) and housing