Product Details

60mm diameter With 420mm DC 12V Tangential Fan Waterproof IP55

Our cross flow fans, also named as tangential or blower wheel fans will generate a wide, even flow of air parallel to the unit being cooled, insuring greater efficiencies and lower noise ratios compared to axial fans.

1	RATED VOLTAGE	VOLTS	V	12V DC
2	OPERATION VOLTAGE	VOLTS	V	8.4VDC-13.2VDC
3	size	mm		H M L	65mm x 240mm
4	INPUT CURRENT	AMP	A	1.7 0.72 0.46	AT RATED VOLTAGE
5	INPUT POWER	WATTS	W	20.4 8.64 5.52	AT RATED VOLTAGE
6	ROTATION SPEED	RPM	RPM	2000 1600 1400
7	ACOUSTICAL NOISE(AVG)	dB(A)	dB(A)	50 46 43	DETAILS SEE ATTACHED PAGE.
8	MAX .AIR-FLOW	CFM	Q	200 172 145	TWO-CHAMBER METHODS
8	MAX .AIR-FLOW	CFM	Q	200 172 145	DEAILS SEE ATTACHED PAGE.
9	MAX . AIR-PRESSURE	mmH₂O	P	5 4 3.5	TWO-CHAMBER METHODS
9	MAX . AIR-PRESSURE	mmH₂O	P		DEAILS SEE ATTACHED PAGE.
10	INSULATION	MEG.	MΩ	>20MΩ	BETWEEN FRAME AND
10	RESISTANCE	OHM	MΩ	>20MΩ	TERMINAL
11	DIELECTRIC STRENGTH			5Ma MAX.	BETWEEN FRAME AND
				AT 500V AC 60HZ	TERMINAL.
				FOR 1 MINUTE
12	ROTARY DIRECTION			CCW
13	INSULATION CLASS			CLASS B
14	LIFE EXPECTANCY			30000 Hours at 25℃/65%RH

1.SCOPE:

THIS SPECIFICATION DEFINES THE ELECTRICAL AND MECHANICAL CHARACTERISTICS OF THE DC CROSS FLOW FAN.
THE FAN MOTOR IS WITH TWO PHASES AND FOUR POLES

2.ELECTRICAL CHARACTERISTICS:
ALL MEASUREMENTS PERFORMED AT25~30℃ ROOM TEMPERATURE
& 50~80%R.H.UNLESS OTHERWISE SECIFIED.

3,MECHANICAL
3.1.BEARING SYSTEM ------------------3 BALL BEARING.
3.2.LEAD WIRE ---------------- 1007 AWG# 20,80℃,300V, L=900MM
                          +POSITIVE-------------RED
                              --NEGATIVE-----------BLACK
                              H: BLACK +BROWN
                              M: BLACK+YELLOW
                              L: BLACK+WHITE

4,ENVIRONMENTAL:
      4-1.OPERATING TEMPERATURE----------------------- -10 TO+50℃
      4-2.STORAGE TEMPERATURE ------------------------- -20 TO+65℃
      4-3OPERATING HOMIDITY-----------------------------------RH20%-80%

5:DIMENSIONS DRAWING UMIT:MM