T series Triple output switching power supply 30W (T-30W)
Negotiable /Piece
Min.Order:500 Pieces
Zhejiang Carspa New Energy Co., Ltd.
Triple output switching power supply 30W
Features:
·AC input voltage range selected by switch
·Small volume, low weight, high efficiency
·Protections: short circuit/over load
·LED indicator for power on
·100% full load burn-in test
·2 Year warranty
T-30W | ||||||
Model | T-30A | T-30B | ||||
Output | DC voltage | CH1:+5V | CH2:+12V | CH3:-5V | CH1:+5V | CH2:+12V |
Voltage tolerance | ±2% | +4%~-6% | +5%~-10% | ±2% | +4%~-6% | |
Rated current | 3A | 1A | 0.5A | 3A | 1A | |
Current range | 0.6~3A | 0.1~1A | 0.1~0.5A | 0.6~3A | 0.1~1A | |
Rated power | 30W | 33W | ||||
Ripple&noise | 80mvp-p | 100mvp-p | 100mvp-p | 80mvp-p | 100mvp-p | |
DCvoltage ADJ.range | CH1:-9%~+10% | |||||
Input | Voltage range | 90~132VAC/180~264VAC(selected by switch), 255~373VDC | ||||
Frequency | 47~63Hz | |||||
AC current | 0.8A/115VAC, 0.45A/230VAC | |||||
Efficiency | 73% | 74% | ||||
Inrush current | cold start 18A/115VAC, 36A/230VAC | |||||
Leakage current | < 2mA/240VAC | |||||
Protection | Overload | above 110%~150 rated power | ||||
protection type: part layer type current limit,auto-recovery after fault condition is removed | ||||||
Environment | Workingtemp, humidity | - 10°C~+60°C, 20%~90%RH | ||||
Storagetemp. humidity | - 20°C~+85°C, 10%~95%RH non-condensing | |||||
Withstand vibration | 10~500Hz,2G 10min/1cycle, period for 60 minutes, each axes | |||||
Safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC | |||||
Fitstandard | Safety standard | Fit UL1012 | ||||
EMC standard | meet EN55022, CLASS A | |||||
Others | Dimension | 129*98*38mm (L*W*H) | ||||
Weight/packing | 0.4kg/45pcs/19kg/0.034m³/1.2CUFT | |||||
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |||||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||||
3. Tolerance: includes set up tolerance, line regulation and load regulation. |