Purpose

YAKE RY-1500M is designed for efficient air dehumidification with the air

humidity up to 100%, at the temperature from –20C to +55C with minimum energy

consumption. It can be used either as an independent unit for installation inside and outside of

premises where air humidity control is required or along with an air treatment system.

Design

The dehumidifier answers IP 44 protection class according to IEC.

Body

The dehumidifier body is made of stainless steel. The front and rear parts of the dehumidifier are

equipped with detachable panels that assure access for maintenance. Air ducts are connected

via standard size round air ducts. The electric panel is located in a separate section in the

humidifier upper part, the control panel is located on the dehumidifier front part.

Rotor

The dehumidifier is equipped with a drying rotor manufactured in accordance with unique technologies covered by a patent in force. The rotor represents a matrix consisting of numerous air channels. It is made of composite material with introduced active SelicaGel and assures a very large contact area with air flow for moisture adsorption in the small volume of the rotor. This material is highly efficient for water molecules attraction and retention, it is noncombustible and explosion-proof, with a long service life. The rotor manufacturing technology assures production of a product capable of saturated air processing without risk of destruction, it means that the rotor can be used along with a precooler. Besides, the rotor will not be damaged even if the fan or the reactivation air heater fail to function.

Filters

The dehumidifier is equipped with two filters. One filter is located at the dehumidified air inlet, the

another one is installed at the reactivation air inlet.

Air flow fans:

for dehumidified air flow and for reactivation air flow

The fans are of a radial type, single phase, IP 54 class, ISO F. The fans maintenance can be

performed after the service panels are removed.

Electric panel

Electrical components are located inside the dehumidifier and can be reached through the top panel. Switches and indicators are located in the front part of the electric panel.

Control panel

Different operation modes can be selected using the switches located in the front panel:

0/OFF – The dehumidifier does not operate.

1/ON – The dehumidifier is in operation mode.

MAN – The dehumidifier operates in a continuous mode.

AUTO – Automatic mode at using an external humidistat or at connecting other external

control devices.

Operation principal

The dehumidifier works with two air flows. The volume of the dehumidified air is bigger. The air flow of a smaller volume is used for moisture removal from the dehumidifier rotor. The rotor is subject to the action of different oppositely directed air flows by sectors. The air flow to be dehumidified (PROCESS AIR) passes through the biggest sector. The moisture from the air is trapped (adsorbed) by the rotor material. The air leaves the rotor in dehumidified condition (DRYAIR) and is directed to a certain part of the building or a technological process where dehumidified air or a certain air humidity levels are required. Since the rotor rotates slowly the incoming air always contacts with the rotor active part, thus a continuous dehumidification process is assured. The air flow used for the rotor matrix regeneration is called regeneration air (REGENERATION AIR). It is heated up to 120C and when passing through a small sector it removes the moisture trapped by the rotor material. The moisture is removed from the rotor in the form of humid air (MOIST AIR) which is discharged outside the dehumidified loop.

Project

Package

Installation Guidance

Service for

This is a dehumidifier that has been designed and then made to exacting standards.

We have been examining building Desiccant Dehumidifiers for many years and we are happy that we developed successfully the Ya Ke Powerful Desiccant Dehumidifier series, providing the best quality units for customers. Quality is very important because this type of dehumidifier is often used in dirty and demanding situations but it is important that the customer receives several years problem free use.

The body is made of stainless steel to provide a long lasting finish, and they have a proven history of reliability.

Our team has the skills our clients demand and the knowledge to provide high efficiency dehumidification solutions.

So, Ya Ke desiccant dehumidifiers, the best choices for air dehumidity control!

More Other Products On Show