Mono Poly Silicon / BIPV / CIGS / 1W-300W Solar Panel Simulator For Solar Panel Testing
10 Years Solar Machine Experience / Over 100 Worker in Factory
24 Month Warranty / 24 Hours Response
Free Installation / Free Shipping Cost
Solar Panel Testing Machine Function:
Mainly used in electrical performance auto test and result record of solar Mono-Si, Poly-Si or a-Si cell module.
Low Cost PV Module Tester Machine Technical Parameters
1. [A] grade spectrum;
2. [A] grade unevenness degree of irradiance;
3. [A] grade instability of irradiance;
4. Flash pulse 10~100ms, continuous adjustable;
5. Four-line survey;
6.10 parameters display;
7. 8,000 data collecting dots;
8. Irradiance automatically compensating;
9.Temperature automatically compensating;
asurement parameter displays in tabulation and graphic way;
11.Voice counts off and prompts;
12.Counting prompt of flash times;
13.24hrs continuous working;
14.Working life of imported Xenon lamp is 300, 000 times of flash
15.Touch screen control man-machine interface PLC
PV Module Tester Machine Selling points
- Intelligent temperature control system makes the temperature more homogeneous and easier set and control.
- laminating pressure is adjustable and can be adjusted according to the process, which makes the quality of modules better.
- It Could work continuously in high temperature for 24 hours
- The advanced touch screen operating platform makes it more intuitive to operate, makes it respond more quickly, make the performance more stable and the failure rate is further reduced.
- Appling a fully humanized operating procedure.the equipment is equipped with many detection switches,in the normal production, operators will only be required to put the modules on the heating platform and press the cover switch, the equipment will automatically laminate, cure and open cover automatically and wait for operator to start the next procedure.
Other related solar Assembly Equipments:
| Solar Panel EL Tester Effective test range:1200*2100mm Resolution:1.4 Megapixels Test Time: 1s~60s can be set Test Methods: un contact free style Power:220V/10A/1PH Camero: imported |
| Solar Cell Scribing Machine Light intensity:100mW/cm2 Light intensity non-uniformity:≤±2% Light intensity instability degree of irradiation:≤±2% Test results consistency:≤±0.5% Test error of electrical properties:≤1% Single flash time:10ms Effective test range :2000×1200mm/5W-300W Measuring voltage:10V-100V(resolution 1mV) Measuring current:0-20A(resolution 1mA) Test parameters:Isc,Voc,Pmax,Vm,Im FF,EFF,Temp,Rs,Rsh" |
| | Solar panel Lamination area:2200*2200/2200*1100mm Laminated Cavity Height:25mm Control Mode:The auto/hand-switch Quick heating,good temperature uniformity Germany Simens PLC,high temperature control precision; Taiwan touch screen control Control relay :OMRON |
| | Solar Frame Machines Framing size: Min:350×500*35MM Max:1150×2100*500MM without bump horny Air cylinder, linear rail, steel structur |
| Solar cell tester Light intensity:100mW/cm2 Light intensity non-uniformity:≤±2% Light intensity instability degree of irradiation:≤±2% Test results consistency:≤±0.5% Test error of electrical properties:≤1% Single flash time:10ms Effective test range :200×200mm/0.1W-5W Measuring voltage:0V-0.8V(resolution 1mV) Measuring current:0-20A(resolution 1mA) Test parameters:Isc,Voc,Pmax,Vm,Im FF,EFF,Temp,Rs,Rsh
|
| | |
| Solar Panle Defect Testing Machine | EL Testing Machinery |
| |
| Solar Sun Simulator Working Condition | PLC Control System |
| |
| Solar Cell Sun Simulator | Solar Equipment Solar Exhibition |
our Yutube Video:
♥♥♥ Contact Simmer
Jiangsu Keyland Laser Tecnology
Mobile / Whatsapp +86-15926481511
Skype:simmer991
Website: /
Clear your requirement,suggest you right machine