Specifications

1.expanded metal
2.stainless steel/steel/Aluminum/copper plate
3.Thickness:0.3-0.5mm
4.Width:8cm,10,15,20
Length:10,40,50cm

2.Craft: Press and expand

 

3.Character: firm, durable, elegant appearance

 

4.Specification:

Metal Thickness	Nominal size of holes			Size of standard product		Calculated Weight kg/m2
	SWM	LWM	Strand	Width	Length
0.5	3	6		1000 2000	2000	1.76
	3.2	8
	5	10
	6	12.5		1800	3000	1.08
	7	14
	8	16		2000	3340
	9	20
	12	30	1.35	1800 2000	3600 4000	0.88
	10	25	1.12
0.8	10	25	1.12
	12	30	1.35			1.41
	15	40	1.68
1.0	10	25	1.12
	12	30	1.35			1.76
	15	40	1.68
1.2	10	25	1.13
	12	30	1.35			2.12
	15	40	1.68
	18	50	2.03
1.5	15	40	1.69			2.64
	18	50	2.03
	22	60	2.47
	29	80	3.25			3.53
2.0	18	50	2.03	1800 2000 2500	3600 4000 5000
	22	60	2.47
	29	80	3.26			4.42
	36	100	4.05
	44	120	4.95			5.29
3.0	36	100	4.05
	44	120	4.95
	55	150	4.99	2000	5000	4.27
				2500	6400
	65	180	4.60	2000	6400	3.33
				2500	8000
4	22	60	4.5	1500 | 2000	2000-3000	12.84
	30	80	5		2000-4000	10.46
	38	100	6		2000-4500	9.91
5	24	60	6		2000-3000	19.62
	35	80	6		2000-4000	14.71
	38	100	7		2000-4500	14.67
	56	150	6		2000-6000	8.41
	76	200	6		2000-6000	6.19
6	32	80	7		2000-4000	20.60
	38	100	7		2000-4500	17.35
	56	150	7		2000-6000	11.77

 

5.Use: widely used in construction, protection, building ceiling, sound-resisting, filtration of ores, etc.

Regular Expanded Metal is an open mesh, finished product that is simultaneously die-cut and expanded as it moves through progressive dies on a press. In the expanding process, the metal can be expanded up to ten times its original size, lose up to 80% of its original weight per square foot, and still retain form and rigidity.

 

6.Flattened Expanded Metal is Regular Expanded Metal that has been passed through flattening rolls (cold rolled). This rolling process reduces the thickness of the sheet, stretches the pattern of the sheet, and provides a smooth flat finish.