mirro pressure cooker parts
USD $55 - $70 /Piece
Min.Order:1000 Pieces
Foshan Shunde Hantai Electrical Co., Ltd.
High power induction cooker
Commercial Induction Cooker
Operating Instructions
Before operating this product, please read this instruction booklet carefully and completely.
WARNING
Can’t clean the machine in the water or clean the machine by splashing water
Prevent the top plate from being damaged or broken
If the top plate is in a rift of situation, please shut down the machine immeditately and pull out the plug, then sends the machine to the repair center.
Specification
High efficiency and energy saving
Multi-ply protection function, more safe
Ten stages of fire adjustment to meet different cooking needs
Special design of energy saving, controlled by microcomputer
Convenient timer function.
Excellent detection system, when cooking with unsuitable pot(including unsuitable pot with unsuitable material, smaller size),the machine won’t heat
Automatic cooking function, the cooking fire, temperature and cooking procedure are adjusted by key-press
7.Check Points
Phenonena | Check Points |
When “ON/OFF” is pressed,the indicating lamp does not light |
|
The cooker won’t heat,”B-B” is heard or “E0” is displayed |
|
The indicating lamp flashes or”E1” is displayed,but it won’t heat | Current voltage is lower than 160V,try again when voltage between 160V~270V. |
The indicating lamp flashes or”E1” is displayed,but it won’t heat | Current voltage higher than 270V,try again when voltage between 165V~270V. |
The indicating lamp flashes or”E2” is displayed,but it won’t heat | Inner of unit termperature is too high,please check motor fan is good working or spread exit is open or not. |
The indicating lamp flashes or”E3” is displayed,but it won’t heat | Check the electricity power is suitable or not. |
The indicating lamp flashes or”E5” is displayed,but it won’t heat | The pot is too hot,please wait till the pot is in normal temperature |
The indicating lamp flashes or”E6” is displayed,but it won’t heat | Inside of pot no loading,please select fry or other function. |
8.Service
If the power cord is damage,the cooker must be send to the appointed repair center and changed to use the same specification power-cord. To avoid danger to you and damage to the cooker,please send the cooker to the dealer or the appointed repair center when the cooker is breakdown.Do not repair it by yourself. Contact our technology serive center directly if the repair centers can not repair the cooker. |