ZTE 5950-36PM-H, RS-5950-36PM-H, 24 GE RJ45+4 GE Combo+2  expansion ZTE ZXR10 5950-H 5950-36TM-H 5950-36PM-H 5950-56TM-H 5950-56PM-H

ZXR10 5950-H series All Gigabit Intelligent Routing Switch

ZXR10 5950-H series All Gigabit  Intelligent Routing Switches are L3 gigabit box switches presented by ZTE Corporation. ZXR10 5950-H series switches provide high-density Gigabit access interfaces and 10Gigabit uplink interfaces, comprehensive L2 switching and L3 routing capabilities, and abundant security and reliability related features. ZXR10 5950-H series switches support VSC and POE; they can be applied in multiple scenarios including campus access and aggregation, IDC gigabit access, bringing big-bandwidth and reliable solution for enterprise or campus users.

ZXR10 5950-H offers the following switch types: 5950-36TM-H, 5950-36PM-H, 5950-56TM-H and 5950-56PM-H. The interfaces offered by these switches are listed below:

5950-36TM-H: 24*GE RJ45+4*GE Combo+2* expansion slot

5950-36PM-H: 24*GE RJ45+4*GE Combo+2* expansion slot,the electrical interfaces support POE, while some interfaces support DUAL POE+.

5950-56TM-H: 48*GE RJ45+2*expansion slot

5950-56PM-H: 48*GE RJ45+2*expansion slot, the electrical interfaces support POE, while some interfaces support  DUAL POE+

The expansion card slot can be equipped with the following types of expansion cards:

4*10GE-SFP+expansion card/4*1GE-SFP expansion card/4*1GE expansion card/2*40G mini SAS stacking card.

Full Service Support

ZXR10 5950-H series switches support full L2 switching technologies, including PVLAN, protocol-based VLAN, QinQ and VLAN translation, helping user to implement service identification and separation.

L3 routing protocols including static routing, RIP, OSPF, IS-IS and BGP are all supported.

Multicast-based technologies like video-surveillance, videoconference are becoming more and more popular these days. ZXR10 5950-H fully supports L2/L3 multicast, including IGMP snooping, Filtering, Proxy and Fast-leave, MVR (Multicast VLAN Registration) and PIM-SM to facilitate deployment of these services.

ZXR10 5950-H supports UDF(user define forwarding) table, which allows flexiblilty in configuration such that the user can allocate more resources for a table requiring comparably more entries ,for example ,one configuration may have a large L2 mac table and a small L3 host route table ,another configuration may have a large L3 host table and a small L2 mac table ,the shared entry can reach 176K ,and can be flexibly partitioned.

Enhanced Security

ZXR10 5950-H supports diversified mechanisms to guarantee the security of the network:

CPU DDOS protection capability helps the equipment to mitigate the influence caused by attacks, while the equipment itself won't be brought down, which ensures high network stability.

Hardware based ACL for filtering and traffic control purpose.

DAI (Dynamic ARP inspection) function and IP/MAC binding help prevent against DOS (Denial of Service) attacks.

Spanning tree protection (Root guard), BPDU protection, ARP attack protection and broadcast storm protection.

URPF (unicast reverse path forwarding) to prevent source-spoofing attack.

Enhanced Reliability

With UDLD (uni-Directional Link Detection), uni-directional link failure caused by wiring mistake or port failure can be detected.

Loop detection allows the switch to detect possible loops without the need to enable STP.

When deployed in layer 2 environment, ZESR/ZESR+ (ZTE Ethernet Smart Ring) and ZESS (ZTE Ethernet Smart Switching) can be used to implement fast switchover in case of single point failure.

ZXR10 5950-H supports both close ring ZESR and open ring ZESR+, which are very good network redundancy solutions in ring topology networks.

ZESS is a very simple yet effective means to realize dual-homing purpose.

Compared with STP, the biggest advantage is that the link will switch and recover quickly when one way is disconnected and the time needed for switchover is less than 50ms. ZESR/ZESR+ support VLAN load balancing to enable efficient utilization of redundant links.

Virtual Switch Clustering(VSC)

ZXR10 5950-H supports Virtual Switch Cluster(VSC), which means the virtualization of multiple physical switches into one logical switch. VSC enhances cluster system capacity and port density, and at the same time simplifies simple topology and eases administration. Network extensibility is enhanced for user can freely increase the capacity of a single logical network node. N+1 redundancy for the master switch help avoid single-point failure and reduces service breakdown.

Access interfaces from different member switches can be used to form a logical smart-group, fully leveraging the capacity of each single switch member, and increasing the flexibility of network design.

Intelligent Power Over Ethernet

All the electrical access interfaces of 5950-36PM-H and 5950-56PM-H support POE and POE+, which go in line with 802.3af and 802.3at standards, and are compatible with PD equipments that doesn't support 802.3af and 802.3at. Each POE interface can provide 30 watt POE power output, some interfaces can provide dual channel maximally 60 watt POE power output, fulfilling the requirement of big-power consumption PD equipment, like the out-door LED displaying panel.

POE provides a lower total cost of ownership (TCO) for employments that incorporate IP phones, wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. POE removes the need to connect power cable to each POE-enabled device and eliminates the cost of additional electrical cabling and circuits, bringing great convenience in the "Internet of things" age.

ZXR10 5950-H supports assigning time-ranges for POE, in time periods that doesn't need power output, the POE function can be turned off, saving energy for the customer. During the time when power output is unnecessary, the POE function can be turned off to save energy for the customer.