Magic RRU– ZXSDR R8861

ZXSDR R8861 supports the following frequency bands: 900/1800/2100MHz (Band 1/3/8)

Highlight

The smallest size in the industry

R8861, the smallest 1T2R RRU of 80W output power in industry, is less than 10L in volume and only 12 kg in weight. The light and compact design enables it to be easily carried and installed. The load bearing requirement for the tower or wall is lower than other equipments.

Green RRU with lower power consumption

R8861's improvement in materials and design of structure and modules, results in higher PA efficiency and lower power consumption than last generation of RRU. The remarkable decrease in power consumption effectively reduces the expenditure of power supply equipment such as battery, and electric charges.

Faster deployment

Compared with last generation product, R8861 is more easily to be installed and commissioned. With only half of the volume, R8861 is lighter and convenient to be managed. There are fewer interfaces in R8861 without loss in the functions. With unified mounting kits, the entire installation process of R8861 requires less than five minutes. All these improvements lead to fast deployment of the equipments, shortened operation and maintenance duration and measurable reduction of expenditures.

Overview

ZXSDR BS8700 is the new generation distributed base station. With all IP MicroTCA architecture and RRU series, BS8700 meets the requirements of rapid flexible networking & smooth network convergence towards LTE.

Customer Value

Wide coverage
Supporting 4-level RRU connection in cascade, maximum 100 km for UMTS coverage

RRU near antenna installation with less feeder loss and better coverage

Multi-RRU for one logical cell used for high speed railway coverage

Rapid Installation
Compact RRU design, Light and small

Supporting wall/pole/gantry mounted and on top of tower installation

IP65 protection class to withstand terrible environment

Flexible Networking
Supporting ATM/IP dual protocol stacks

Providing various interfaces E1/T1/STM-1/GE/SDH/Hybrid/ Satellite

Saving Energy
50% high efficient PA to reduce power consumption

Natural cooling design, 0dB noise

Smooth Evolution
MicroTCA based architecture, control & transmission parts totally shared

Software defined carrier by MCPA technology

2T4R module introduced for MIMO or 2 sectors

Smooth Evolution to HSPA+ and LTE

R8840 is a UMTS multi-carrier radio unit, working on 2100MHz/AWS. R8840 supports maximum 4 carriers, the output power is 60W. R8840 module consists of MCPA (multi-carrier power module) module, transceiver module, duplex filter LNA and RPWAC/DC (Power for AC or DC). There are one TX/RX port and one RX port for connecting antenna. R8840 employs compact cabinet design, as shown in Figure 16. Dimension of R8840 is 370×320×160mm (H×W×D).

R8860 is multi-carrier RF module, working on 850/900/1800/1900MHz. R8860 can be configured as GSM only, UMTS only or mixed mode module. R8860 can be configured to 1 to 6 TRX in GSM mode. In case of GMSK modulation, 80W TOC output power can be provided. If R8860 is used as UMTS mode, it can support 4 carriers with 80W TOC output power. In mixed mode, R8860 can support 4 GSM TRX and 1 UMTS carriers or 2 GSM TRX and 2 UMTS carriers.

R8880 is a multi-carrier RF module. R8880 can be configured as UMTS mode. It can process 2 received signals and 2 transmitted signals. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can be configured as UMTS mode. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier.

R8882 is a multi-carrier RF module. R8880 can be configured as UMTS mode. It can process 4 received signals and 2 transmitted signals. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier.

Magic RRU– ZXSDR R8861 - ZTE Corporation

ZXSDR R8861 is the 1T2R RRU in ZTE Magic RRU series, the smallest one in the industry. With SDR structure and new technologies, R8861 is 9.9L in volume and 12 Kg in weight. It works in GSM, UMTS or LTE single mode, or multi-mode in the same frequency band.

Packaging & Shipping

Trade terms: FOB,CIF,CFR,etc
Price Terms: L/C,D/P,T/T,Western Union,PAYPAL
Payment Terms: T/T in advance
MOQ: 1 pcs
Port: Hongkong / Shenzhen
Lead time: Within 5 working days after receipt payment.
Shipment: Express, Air, Sea
Supply capability: 200 Piece/Pieces per Week
Sample availability: Yes( not free)
Package information: carton package with Huawei /Alcatel / ZTE/ Emerson original package

Our Services