Specifications
1. Best price with good quality2. Different sizes meet
3. Quick delivery
4. Environmental protection
5. Small MOQ
Introduction
Female hex standoff is made of nylon 66 , a through threaded inside hole and hexagonal body .
Application
1. PC panel
2. Metal panel
3. Electrical product
4. Household appliance
Advantages
1. Perfect insulation
Nylon material is good inslated and without any electric conduction.
2. Abbration of flame
Flame class of the nylon is 94V-2
3. Light for weight
The density of nylon is only 1.15g/cm3
4. Anti-rust
No any rust even in the damp circumstance .
5. Perfect elastic resilience .
Melting point of the nylon material is 260°, this make nylon has a good elastic resilience .
6. Strong abrasive resistance .
7. fire retardancy
8 Crrosion proofing,
9. antiageing,
10. flexbility
11. firm structure
12. reliable work
13. Conduct insulativity
Specification
| M | A | L | C |
| 3 | 5.5 | 6 | 3 |
| 3 | 5.5 | 8 | 3 |
| 3 | 5.5 | 10 | 3 |
| 3 | 5.5 | 12 | 3 |
| 4 | 7 | 15 | 4 |
| 4 | 7 | 20 | 4 |
| 4 | 7 | 25 | 4 |
| 4 | 7 | 30 | 4 |
| 4 | 7 | 40 | 4 |
Introduction of Nylon
Nylon material is widely used for verious fileds as outstanding performance and best cost , and there are several kind models under the nylon material .
1.PA66
High fatigue strength and rigidity , good heat resistance , low friction factor, abrasion resistant, but weak in hygroscopicity . which is used for moderate load requirement and working temperate less than 120 degree .
2. PA6
It is inferior for PA66 on fatigue strength and rigidity , but is more good on flexibility and reduce noise and weakning . which is used for light load requirment and 80-100 degree working temperature .
3. PA610
It is inferior for PA66 on fatigue strength and rigidity but good hygroscopicity and abrasion resistant . which is used for precise equipment and the pieces where with large change for the temperature .
4. PA1010
It is not good than PA610 in hygroscopicity but easy to process and perfect abrasion resistant . which is used for where moderate tmeperature with various changes of moisture and less or no lubrication .
5. MCPA
It is superior for PA66 and PA610 on fatigue strength and rigidity and heat resistance , but is inferior for PA66 or PA610 on hygroscopicity , which can be used directly for casting to be formed and with large load requirement .
Quality control
(1) Checking material before feed in
all material must be checked according to the requirements of products before put them onto the machines to ensure material is available .
(2) IPQC ( by handle and auto-machined control )
The semi-finished products must be checked in special tools during production , this ensure products are always under control .
(3) Chemical elements analysis and fhysical testing after post treatment
The most metal products need post treatment after finished proudct, all products will be tested after than to make sure the quality of products are meet the related requirement .
(4) The second inspection , sort all finished goods by sorting machines if required ;
All goods were finished , they must to be tested and checked before package ; In this phase , goods will be checked in full inspection or partial inspection . and checking methods can be by handle or auto-machines .
(5) Packing
Packed in polybags and cartons or in small color bags .
(6) Last inspection ( spot checking , packages status , quantity etc )
When all goods are ready , we will make a final inspection for quantity and package’s status .
(7) Delivery
Packing
1. In bulk
Items are packed in apparent polybags and solid cartons then , usually 1 bags in each carton and the gross weight is about 2 kilograms .
The sizes of the carton
20x28x16
16x18x25
20x22x28
16x18x28
Application
This package is usually for private use in the factory to assemble parts
Advantages
1) suitable for production line in the factory
2) big quanity each bag
3) low cost on package
2. Box
Items are packed in boxes inside and some boxes to a carton , the boxes would be colored or plain . 5 kilograms each carton . it contains plastic box and chipboard box . and both kinds of boxes can be print the customer’s logo .
Application
Box package is usually for sales in store .
Advantages
1) Individual packing
2) Customization design
3) Easy to sales
4) easy to check
5) easy to carry
6) not easy broken
7) beautiful apperance.
FAQ’s
Q. How about your capacity ?
A. With scale of ten thousand square meters , different processing machines , we are able to finish up to 2000 tons raw material every year , generally , one full 20 feet container ( about 20 tons) can be done in 20- 25 days .
Q.How long I can get samples for approval before placing order ?
A. Let you get and confirm samples in first time is our reponsiblity and pleasure , just in one week for new samples that need to be done in new tools , and we can deliver samples within 24 hours for exsiting samples once received your request .
Q.What are your popular payement menthods ?
A. T/T is our prior choose for all , of course , we are also accept L/C , Westunion , paypall .
Q. What production you produce ?
A. We are producing different screws like machine screws , self tapping screws , wood screws , stainles steel screws and self drilling screws etc and metal stamping parts and plastic fittings like hex standoff etc .